X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1046aqds_lpuart_defconfig;h=460527039ed1a8372b21afed152c30367617c469;hb=8d1fc6fb89826efb6bbbedb57862496e18737877;hp=7edb0ad3848af4b274215b289e1d45f1b52d40d5;hpb=2fe88d452268d61b5ca9cb0b1dda2974cc43faeb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index 7edb0ad..4605270 100644
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -1,9 +1,13 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1046AQDS=y
 CONFIG_SYS_TEXT_BASE=0x60100000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_DM_GPIO=y
 CONFIG_FSL_LS_PPA=y
-CONFIG_DISTRO_DEFAULTS=y
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="LPUART"
@@ -17,12 +21,13 @@ CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
 CONFIG_MP=y
@@ -30,21 +35,33 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-lpuart"
 CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_ENV_ADDR=0x60300000
 CONFIG_DM=y
+CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_PHYLIB=y
+CONFIG_PHYLIB_10G=y
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_VITESSE=y
 CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_PCIE_LAYERSCAPE_EP=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
+CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_SPI=y
@@ -54,4 +71,4 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_STORAGE=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y