X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1043ardb_sdcard_defconfig;h=c5ccc8a3e31033cc73ba7d663437a215df86d865;hb=306881a0bfca22798da64f55206ef2824f37efed;hp=01adbf0b192fd48cd134aeb288ab3cfe8c517a75;hpb=eaa0bde05186b1738d221bc5effc6f257a14e360;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index 01adbf0..c5ccc8a 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -3,6 +3,8 @@ CONFIG_TARGET_LS1043ARDB=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x300000
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
@@ -19,6 +21,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_FSL_PBL=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
@@ -39,18 +42,23 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_FSL_CAAM=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_BUS=1
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_VITESSE=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_PCI=y
@@ -67,3 +75,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y