X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1043ardb_nand_SECURE_BOOT_defconfig;h=f399b1cbb3733d1963253caf1b954702b0742a9d;hb=b641dd3ec8dc3f6b18d2fa945ac3ab597063d191;hp=4ceae3286408f4ca42e77131fbc7483d62cbeab0;hpb=d32519ac8a4483803975b5aa4ef4f5affe1964bc;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index 4ceae32..f399b1c 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -3,22 +3,26 @@ CONFIG_TARGET_LS1043ARDB=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_NXP_ESBC=y
+CONFIG_DM_GPIO=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
 CONFIG_SPL=y
+CONFIG_SPL_TEXT_BASE=0x10000000
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=2
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND_BOOT"
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_FSL_PBL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
 CONFIG_SPL_CRYPTO_SUPPORT=y
@@ -28,6 +32,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_CMD_IMLS=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -40,10 +45,13 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
+CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
@@ -52,11 +60,17 @@ CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_BUS=1
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_REALTEK=y
+CONFIG_PHY_VITESSE=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
@@ -64,6 +78,7 @@ CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y