X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1043aqds_lpuart_defconfig;h=1a6079acefff4de333102c0ac11cfaba54e5c855;hb=f76750d1113380462413bad94d7a400af1aa4909;hp=6df098382db970f2b681c34b16a0435295d4af3b;hpb=6674edaabfd271471608146806f5b6540bc76a1b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig
index 6df0983..1a6079a 100644
--- a/configs/ls1043aqds_lpuart_defconfig
+++ b/configs/ls1043aqds_lpuart_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1043AQDS=y
 CONFIG_SYS_TEXT_BASE=0x60100000
+CONFIG_SYS_MALLOC_LEN=0x120000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fffffff
@@ -10,7 +11,6 @@ CONFIG_SYS_I2C_MXC_I2C1=y
 CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_SYS_I2C_MXC_I2C4=y
-CONFIG_SYS_MALLOC_LEN=0x120000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-lpuart"
 CONFIG_FSL_USE_PCA9547_MUX=y
@@ -50,6 +50,7 @@ CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
@@ -61,17 +62,24 @@ CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_IFC=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SF_DEFAULT_BUS=1
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
 CONFIG_PHYLIB=y
 CONFIG_PHYLIB_10G=y
 CONFIG_PHY_REALTEK=y
 CONFIG_PHY_VITESSE=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
+CONFIG_SYS_FMAN_FW_ADDR=0x60900000
 CONFIG_NVME=y
 CONFIG_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_SYS_QE_FW_ADDR=0x60940000
 CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
 CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
@@ -81,4 +89,3 @@ CONFIG_DM_SPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y