X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1028ardb_tfa_SECURE_BOOT_defconfig;h=a8e878f3566b783ec9f32d1e43871d0e79c8e533;hb=a09fea1d28fe3c69a64bee092f5a764274d26ca2;hp=63976ae754fed208a8f8e35884becee6fa36675c;hpb=92430b8fc8aac3b4ab92e9ca8a09d83c4788c609;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
index 63976ae..a8e878f 100644
--- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
@@ -1,14 +1,15 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028ARDB=y
-CONFIG_SECURE_BOOT=y
-CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
+CONFIG_NXP_ESBC=y
+CONFIG_SYS_FSL_SDHC_CLK_DIV=1
+CONFIG_ENV_SIZE=0x2000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -20,7 +21,6 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_WDT=y
 CONFIG_CMD_CACHE=y
@@ -31,10 +31,15 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
@@ -51,6 +56,8 @@ CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2127=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y