X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1028aqds_tfa_lpuart_defconfig;h=7e0860103f0897fb008daa94096467222c187775;hb=363397ae1a17ae58f1ef6664e775d3c16091af87;hp=d016202a242f7673b23919f0adfff9780037412b;hpb=72655b254b81958a5820536a41ab1630bbf8255f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig
index d016202..7e08601 100644
--- a/configs/ls1028aqds_tfa_lpuart_defconfig
+++ b/configs/ls1028aqds_tfa_lpuart_defconfig
@@ -1,29 +1,39 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_TARGET_LS1028AQDS=y
 CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_LEN=0x202000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x500000
-CONFIG_ENV_SECT_SIZE=0x40000
+CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-qds-lpuart"
+CONFIG_FSL_QIXIS=y
 CONFIG_FSPI_AHB_EN_4BYTE=y
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-qds-lpuart"
+CONFIG_ENV_ADDR=0x20500000
 CONFIG_AHCI=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_REMAKE_ELF=y
+CONFIG_MP=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M"
 CONFIG_MISC_INIT_R=y
+CONFIG_ID_EEPROM=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
@@ -39,38 +49,42 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_ADDR=0x20500000
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_NETCONSOLE=y
+CONFIG_SYS_RX_ETH_BUFFER=8
 CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+# CONFIG_DDR_SPD is not set
+CONFIG_DIMM_SLOTS_PER_CTLR=2
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
-CONFIG_DM_MMC=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
 CONFIG_PHY_ATHEROS=y
 CONFIG_PHY_VITESSE=y
+CONFIG_PHY_FIXED=y
 CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_DM_MDIO_MUX=y
 CONFIG_E1000=y
 CONFIG_FSL_ENETC=y
 CONFIG_MDIO_MUX_I2CREG=y
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_DM_RTC=y
@@ -80,12 +94,12 @@ CONFIG_DM_SCSI=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_NXP_FSPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y