X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1028aqds_tfa_lpuart_defconfig;h=2ae107704dcf5ecbb69768bc11689822c9eb7cab;hb=79b8849d4c1e73df2a79a1d5a5f6166d0dd67a12;hp=195c6f85ccfbc713c42e48cc65c8d0fc9ba463bd;hpb=bfb5bfa3c58adc2ef5dbd1bb95b79b31e0dc221c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1028aqds_tfa_lpuart_defconfig b/configs/ls1028aqds_tfa_lpuart_defconfig
index 195c6f8..2ae1077 100644
--- a/configs/ls1028aqds_tfa_lpuart_defconfig
+++ b/configs/ls1028aqds_tfa_lpuart_defconfig
@@ -1,4 +1,5 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_TARGET_LS1028AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_MALLOC_F_LEN=0x6000
@@ -8,6 +9,7 @@ CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x500000
 CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_SYS_MALLOC_LEN=0x202000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-qds-lpuart"
 CONFIG_FSPI_AHB_EN_4BYTE=y
@@ -23,7 +25,9 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M"
 CONFIG_MISC_INIT_R=y
+CONFIG_ID_EEPROM=y
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
@@ -46,11 +50,12 @@ CONFIG_DM=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+# CONFIG_DDR_SPD is not set
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
-CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
@@ -70,7 +75,6 @@ CONFIG_FSL_ENETC=y
 CONFIG_MDIO_MUX_I2CREG=y
 CONFIG_NVME=y
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_DM_RTC=y
@@ -85,7 +89,6 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_NXP_FSPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y