X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig;h=118a085ec3f20e847738beaaa07c7669acaccaf3;hb=b8e09898919e23c5d7f1934be7bf9a3a6f0deb0e;hp=3351b390d4a2be055ad2ddfcfac796edee242ef7;hpb=1e72ad6b387c599f477f83cda67ab525c089a9b0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
index 3351b39..118a085 100644
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@@ -1,16 +1,14 @@
 CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=12500000
 CONFIG_TARGET_LS1021ATWR=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_LEN=0x1020000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x20000
-CONFIG_NXP_ESBC=y
 CONFIG_SYS_I2C_MXC_I2C1=y
 CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
@@ -21,30 +19,50 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
-CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_NXP_ESBC=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT"
 CONFIG_RAMBOOT_PBL=y
 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1021atwr/ls102xa_pbi.cfg"
 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg"
+CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=0
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
+CONFIG_BOOTCOMMAND="run distro_bootcmd; run sd_bootcmd; env exists secureboot && esbc_halt;"
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_MISC_INIT_R=y
 CONFIG_ID_EEPROM=y
+CONFIG_SPL_MAX_SIZE=0x1a000
+CONFIG_SPL_PAD_TO=0x1c000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x80100000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_FSL_PBL=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x1001d000
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x82104000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_WATCHDOG=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
@@ -57,11 +75,15 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="ethernet@2d10000"
 CONFIG_DM=y
 CONFIG_SPL_DM=y
 # CONFIG_SPL_BLK is not set
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
 # CONFIG_SPL_DM_I2C is not set
 CONFIG_SPL_SYS_I2C_LEGACY=y
@@ -72,8 +94,12 @@ CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_EMPTY_INFO=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_FLASH_QUIET_TEST=y
+CONFIG_SYS_MAX_FLASH_SECT=1024
 CONFIG_PHY_ATHEROS=y
 CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
@@ -83,10 +109,12 @@ CONFIG_MII=y
 CONFIG_TSEC_ENET=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_U_QE=y
+CONFIG_SYS_QE_FW_ADDR=0x940000
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
-CONFIG_SYS_QE_FW_ADDR=0x940000