X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1021atwr_nor_lpuart_defconfig;h=1399b09c83c0120823a36fc8799ac3035404381e;hb=a552ffc9d270769286d7a0697913689c31537bfa;hp=d06f8edfbb48d6141de63fbe591bc795e645bd77;hpb=1e72ad6b387c599f477f83cda67ab525c089a9b0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig
index d06f8ed..1399b09 100644
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ b/configs/ls1021atwr_nor_lpuart_defconfig
@@ -1,11 +1,10 @@
 CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=12500000
 CONFIG_TARGET_LS1021ATWR=y
 CONFIG_SYS_TEXT_BASE=0x60100000
 CONFIG_SYS_MALLOC_LEN=0x1020000
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_SYS_I2C_MXC_I2C1=y
@@ -13,22 +12,28 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-lpuart"
+CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_ENV_ADDR=0x60300000
 CONFIG_AHCI=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_LOAD_ADDR=0x82000000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
-# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd;env exists secureboot && esbc_halt;"
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_MISC_INIT_R=y
 CONFIG_ID_EEPROM=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
@@ -43,10 +48,13 @@ CONFIG_CMD_USB=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x60300000
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="ethernet@2d10000"
 CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
@@ -55,6 +63,7 @@ CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_PHY_ATHEROS=y
@@ -64,13 +73,14 @@ CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_SYS_QE_FW_ADDR=0x60940000
 CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_SYS_QE_FW_ADDR=0x60940000