X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1021atwr_nor_SECURE_BOOT_defconfig;h=d62dcfa751593c8a5885866d7827fc1fd3ca29c2;hb=c45568cc4e51b7bbe2f3ce28d8f2566048aeebf3;hp=f1fdae956546340795512609fc1ad89318dd855e;hpb=719afeb0b3c60af82f701f122978b935aa6a5217;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
index f1fdae9..8daa1c6 100644
--- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
@@ -1,10 +1,25 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=12500000
 CONFIG_TARGET_LS1021ATWR=y
 CONFIG_SYS_TEXT_BASE=0x60100000
-CONFIG_SECURE_BOOT=y
+CONFIG_SYS_MALLOC_LEN=0x1020000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x20000
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
+CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
+CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_AHCI=y
+CONFIG_NXP_ESBC=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=1
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -13,39 +28,59 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
+CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd;env exists secureboot && esbc_halt;"
 CONFIG_SILENT_CONSOLE=y
-# CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_MISC_INIT_R=y
+CONFIG_ID_EEPROM=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_BMP=y
 CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="ethernet@2d10000"
 CONFIG_DM=y
+CONFIG_SATA=y
+CONFIG_SATA_CEVA=y
+CONFIG_MPC8XXX_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x53
 CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
-CONFIG_NETDEVICES=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
+CONFIG_MII=y
 CONFIG_TSEC_ENET=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_SYS_QE_FW_ADDR=0x60940000
+CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y