X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1021aqds_nor_lpuart_defconfig;h=c27147e3435c52f933badef78b6892d08f2ce436;hb=306881a0bfca22798da64f55206ef2824f37efed;hp=ba3dccabc7e84621b305c1f6e5667e16c8b09b63;hpb=7f513e8196589e3b1274132abe3b59e52979e3e5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1021aqds_nor_lpuart_defconfig b/configs/ls1021aqds_nor_lpuart_defconfig
index ba3dcca..c27147e 100644
--- a/configs/ls1021aqds_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_nor_lpuart_defconfig
@@ -1,26 +1,31 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1021AQDS=y
-CONFIG_VIDEO=y
-CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
+CONFIG_SYS_TEXT_BASE=0x60100000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_DM_GPIO=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_AHCI=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="LPUART"
-CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_BOOTDELAY=3
 CONFIG_SILENT_CONSOLE=y
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_MISC_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
-CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
-CONFIG_CMD_I2C=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -30,18 +35,32 @@ CONFIG_CMD_BMP=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_ENV_ADDR=0x60300000
 CONFIG_DM=y
+CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_FSL_DDR3=y
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
-CONFIG_PHYLIB=y
-CONFIG_NETDEVICES=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_PHY_REALTEK=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
+CONFIG_MII=y
+CONFIG_TSEC_ENET=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_USB=y
@@ -50,4 +69,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y
 CONFIG_VIDEO_FSL_DCU_FB=y
+CONFIG_VIDEO=y
 # CONFIG_VIDEO_SW_CURSOR is not set