X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1021aqds_ddr4_nor_lpuart_defconfig;h=13ded158e68e92c9b4fc48f6d9e01d2a9c6e8ce3;hb=3dc2987f5c9b79e19ea6b0e69e01a817310abaac;hp=d42e3517549bf84e075b96b3d8effa637664c22b;hpb=ea184cbff99ea1d82dcf94c95afe054e95da5069;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
index d42e351..13ded15 100644
--- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
+++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
@@ -1,27 +1,46 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=12500000
 CONFIG_TARGET_LS1021AQDS=y
 CONFIG_SYS_TEXT_BASE=0x60100000
+CONFIG_SYS_MALLOC_LEN=0x1002000
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
+CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_ENV_ADDR=0x60300000
 CONFIG_AHCI=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_FSL_USE_PCA9547_MUX=y
+CONFIG_FSL_QIXIS=y
+# CONFIG_QIXIS_I2C_ACCESS is not set
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="LPUART"
+CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=3
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_MISC_INIT_R=y
+CONFIG_ID_EEPROM=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPIO=y
@@ -39,33 +58,46 @@ CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x60300000
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="eTSEC1"
 CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DYNAMIC_DDR_CLK_FREQ=y
+CONFIG_DDR_ECC=y
+CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x57
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_MAX_FLASH_BANKS=2
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_IFC=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_PHY_REALTEK=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
-CONFIG_NVME=y
+CONFIG_NVME_PCI=y
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_SYS_QE_FW_ADDR=0x60940000
 CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
+CONFIG_LPUART=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_STORAGE=y