X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fls1012aqds_tfa_defconfig;h=7884f388dc6832255da3d303fcdc3c8ea837050c;hb=15155ab0a3d1f839509bcac620bfb38f950bead6;hp=8ded692bc92af6a5760e7d5285846cc1c69342f2;hpb=79b8849d4c1e73df2a79a1d5a5f6166d0dd67a12;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/ls1012aqds_tfa_defconfig b/configs/ls1012aqds_tfa_defconfig
index 8ded692..7884f38 100644
--- a/configs/ls1012aqds_tfa_defconfig
+++ b/configs/ls1012aqds_tfa_defconfig
@@ -1,25 +1,31 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_TARGET_LS1012AQDS=y
 CONFIG_TFABOOT=y
-CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_LEN=0x500000
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
+CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x500000
 CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_SYS_MALLOC_LEN=0x500000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-qds"
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_PCI=y
 CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_PCIE1=y
+CONFIG_FSL_QIXIS=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
@@ -28,6 +34,8 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
 CONFIG_ID_EEPROM=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=532
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
@@ -46,17 +54,15 @@ CONFIG_CMD_CACHE=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_BUS=y
 CONFIG_ENV_SPI_BUS=0
-CONFIG_USE_ENV_SPI_MAX_HZ=y
 CONFIG_ENV_SPI_MAX_HZ=1000000
-CONFIG_USE_ENV_SPI_MODE=y
 CONFIG_ENV_SPI_MODE=0x03
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
@@ -64,21 +70,21 @@ CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_BUS=1
-CONFIG_SF_DEFAULT_SPEED=10000000
 # CONFIG_SPI_FLASH_BAR is not set
+CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_FSL_PFE=y
-CONFIG_DM_ETH=y
 CONFIG_E1000=y
-CONFIG_NVME=y
-CONFIG_PCI=y
+CONFIG_NVME_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_PCF8563=y
 CONFIG_SCSI=y
 CONFIG_DM_SCSI=y
-CONFIG_SYS_NS16550=y
+CONFIG_SYS_NS16550_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y