X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fimx8mq_phanbell_defconfig;h=7714951dd2171045dc5e370a9f47e2ab5155486d;hb=87a9aa604de8a4a50642e25b88af328ab375893b;hp=5be02a33829ba706de42aa38667326a67b302c93;hpb=191ee8aac60d6b828ee5f933ab2c6aceda167082;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/imx8mq_phanbell_defconfig b/configs/imx8mq_phanbell_defconfig
index 5be02a3..7714951 100644
--- a/configs/imx8mq_phanbell_defconfig
+++ b/configs/imx8mq_phanbell_defconfig
@@ -1,52 +1,84 @@
 CONFIG_ARM=y
-CONFIG_SPL_SYS_ICACHE_OFF=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
 CONFIG_ARCH_IMX8M=y
 CONFIG_SYS_TEXT_BASE=0x40200000
+CONFIG_SYS_MALLOC_LEN=0x600000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x400000
-CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_SYS_I2C_MXC_I2C1=y
+CONFIG_SYS_I2C_MXC_I2C2=y
+CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx8mq-phanbell"
+CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_TARGET_IMX8MQ_PHANBELL=y
-CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
-CONFIG_CSF_SIZE=0x2000
-CONFIG_SPL_TEXT_BASE=0x7E1000
+CONFIG_IMX_BOOTAUX=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg"
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_SD_BOOT=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_BOARD_INIT=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_BOOTM_NETBSD is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
+# CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mq-phanbell"
+CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
 CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
+CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_DM_MMC=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y
+CONFIG_PHYLIB=y
 CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
+CONFIG_SPL_POWER_LEGACY=y
 CONFIG_POWER_DOMAIN=y
 CONFIG_IMX8M_POWER_DOMAIN=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_POWER_I2C=y
 CONFIG_DM_RESET=y
+CONFIG_MXC_UART=y
 CONFIG_DM_THERMAL=y
-CONFIG_SD_BOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set