X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fimx28_xea_defconfig;h=b29c62fc59b76f964dd46c798d20d738b9530a31;hb=54f80dd2908af0b851816cf062edf2d454948397;hp=e418d8c9e91815ed58fb22a0d03ac2beb43704b1;hpb=ee66df1425791fe65ccb7b9bfcfd92f3587a0f1d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig
index e418d8c..b29c62f 100644
--- a/configs/imx28_xea_defconfig
+++ b/configs/imx28_xea_defconfig
@@ -1,46 +1,60 @@
 CONFIG_ARM=y
 CONFIG_SPL_SYS_THUMB_BUILD=y
 CONFIG_ARCH_MX28=y
-CONFIG_SYS_TEXT_BASE=0x40002000
-CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_TEXT_BASE=0x40002000
+CONFIG_SYS_MALLOC_F_LEN=0x800
+CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x800
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
+CONFIG_IMX_CONFIG=""
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="imx28-xea"
 CONFIG_SPL_TEXT_BASE=0x1000
 CONFIG_TARGET_XEA=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x1000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x90000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_SYS_LOAD_ADDR=0x42000000
 CONFIG_SPL_PAYLOAD="u-boot.img"
-CONFIG_DEFAULT_DEVICE_TREE="imx28-xea"
 CONFIG_FIT=y
+CONFIG_TIMESTAMP=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200n8"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run ${bootpri} ; run ${bootsec}"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="run prebootcmd"
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0x20000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x0
 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y
 CONFIG_SPL_DMA=y
 CONFIG_SPL_MMC_TINY=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x44000000
+CONFIG_SPL_FALCON_BOOT_MMCSD=y
+CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x800
+CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x400
+CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x40
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_SPL=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
@@ -58,47 +72,40 @@ CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=spi3.0"
-CONFIG_MTDPARTS_DEFAULT="spi3.0:64k(SPL),448k(uboot),128k(envs),384k(unused1),4096k(kernel),8192k(swupdate),-(unused2)"
 CONFIG_DOS_PARTITION=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent interrupts"
 CONFIG_SPL_OF_PLATDATA=y
+# CONFIG_SPL_OF_PLATDATA_PARENT is not set
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_BUS=y
-CONFIG_ENV_SPI_BUS=3
-CONFIG_USE_ENV_SPI_CS=y
-CONFIG_ENV_SPI_CS=0
-CONFIG_USE_ENV_SPI_MAX_HZ=y
-CONFIG_ENV_SPI_MAX_HZ=40000000
-CONFIG_USE_ENV_SPI_MODE=y
-CONFIG_ENV_SPI_MODE=0x0
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
+CONFIG_USE_HOSTNAME=y
+CONFIG_HOSTNAME="xea"
 CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_DEVRES=y
 CONFIG_MXS_GPIO=y
-CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_MXS=y
 CONFIG_MTD=y
+CONFIG_DM_MTD=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_BUS=3
-CONFIG_SF_DEFAULT_MODE=0x0
 CONFIG_SF_DEFAULT_SPEED=40000000
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_ADDR=1
 CONFIG_PHY_FIXED=y
-CONFIG_DM_ETH=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y