X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fdevkit3250_defconfig;h=a0b7a2e2d36cade2328a4af16a6ac2a530a2647a;hb=363397ae1a17ae58f1ef6664e775d3c16091af87;hp=d8a81d755a2f934c1c26fe8a465060b01d9ebe88;hpb=5bec37eb72bdb43d683593148f4911f1e1f34980;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index d8a81d7..a0b7a2e 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -1,33 +1,49 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_SYS_ICACHE_OFF=y
 CONFIG_SYS_DCACHE_OFF=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_LPC32XX=y
 CONFIG_SYS_TEXT_BASE=0x83F00000
+CONFIG_SYS_MALLOC_LEN=0x100000
+CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0xA0000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SPL=y
 CONFIG_SPL_TEXT_BASE=0x00000000
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x80008000
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f20
 CONFIG_BOOTDELAY=1
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200n8"
-CONFIG_VERSION_VARIABLE=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="dhcp; tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; setenv bootargs ${bootargs} ${nfsargs} ${userargs}; bootm ${loadaddr} - ${dtbaddr}"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xfff8
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
+CONFIG_SPL_NAND_DRIVERS=y
+CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
+CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
@@ -35,6 +51,15 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_JFFS2=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
+CONFIG_VERSION_VARIABLE=y
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
+CONFIG_DMA_LPC32XX=y
+CONFIG_LPC32XX_GPIO=y
+CONFIG_SYS_I2C_LEGACY=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_LPC32XX=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
@@ -44,13 +69,21 @@ CONFIG_SYS_FLASH_CFI=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_LPC32XX_SLC=y
-CONFIG_SPL_NAND_SIMPLE=y
+CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
+CONFIG_SYS_NAND_PAGE_COUNT=0x40
+CONFIG_SYS_NAND_PAGE_SIZE=0x800
+CONFIG_SYS_NAND_OOBSIZE=0x40
+# CONFIG_SYS_NAND_5_ADDR_CYCLE is not set
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000
 CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_ADDR=31
 CONFIG_PHY_SMSC=y
+CONFIG_RMII=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_CONS_INDEX=5
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_USB=y
-CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT=y