X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fdevkit3250_defconfig;h=744ffbd94333b530dfa5cb679868f2000b10c3a2;hb=1db251bdd5750e89bdb3c0707f51de0029cc0f0e;hp=a1d277914167ef0506b448e32e874bf1732dc454;hpb=8bef03683623d6a7adfff1f859ed44fad9e92ed7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index a1d2779..744ffbd 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -5,26 +5,37 @@ CONFIG_SYS_DCACHE_OFF=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_LPC32XX=y
 CONFIG_SYS_TEXT_BASE=0x83F00000
+CONFIG_SYS_MALLOC_LEN=0x100000
+CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0xA0000
-CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_TEXT_BASE=0x00000000
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
 CONFIG_SYS_LOAD_ADDR=0x80008000
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000f20
 CONFIG_BOOTDELAY=1
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200n8"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="dhcp; tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; setenv bootargs ${bootargs} ${nfsargs} ${userargs}; bootm ${loadaddr} - ${dtbaddr}"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xfff8
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
 CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GPIO=y
@@ -32,6 +43,7 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_NAND=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
@@ -39,8 +51,12 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_JFFS2=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
 CONFIG_VERSION_VARIABLE=y
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
 CONFIG_DMA_LPC32XX=y
+CONFIG_LPC32XX_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_LPC32XX=y
@@ -50,16 +66,28 @@ CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_MAX_FLASH_SECT=71
 CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_LPC32XX_SLC=y
+CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
+CONFIG_SYS_NAND_PAGE_COUNT=0x40
+CONFIG_SYS_NAND_PAGE_SIZE=0x800
+CONFIG_SYS_NAND_OOBSIZE=0x40
+# CONFIG_SYS_NAND_5_ADDR_CYCLE is not set
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000
 CONFIG_PHYLIB=y
 CONFIG_PHY_ADDR_ENABLE=y
 CONFIG_PHY_ADDR=31
 CONFIG_PHY_SMSC=y
+CONFIG_RMII=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_CONS_INDEX=5
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_USB=y
+CONFIG_SYS_USB_OHCI_SLOT_NAME="lpc32xx-ohci"
+CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS=1
+CONFIG_USB_OHCI_LPC32XX=y
 CONFIG_OF_LIBFDT=y