X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fbitmain_antminer_s9_defconfig;h=b0d2105db6e45c962a3201a11fb6957ac9f22ac0;hb=c45568cc4e51b7bbe2f3ce28d8f2566048aeebf3;hp=9f88023836897d03d97a63b410b70d2dbbd610fe;hpb=5f2fe7d4617bbddc45b6a0cbf21cd468c57f4eba;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/bitmain_antminer_s9_defconfig b/configs/bitmain_antminer_s9_defconfig
index 9f88023..b0d2105 100644
--- a/configs/bitmain_antminer_s9_defconfig
+++ b/configs/bitmain_antminer_s9_defconfig
@@ -3,28 +3,44 @@ CONFIG_SYS_VENDOR="bitmain"
 CONFIG_SYS_BOARD="antminer_s9"
 CONFIG_SYS_CONFIG_NAME="bitmain_antminer_s9"
 CONFIG_SPL_SYS_DCACHE_OFF=y
+CONFIG_SYS_L2CACHE_OFF=y
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="bitmain-antminer-s9"
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_SYS_BOOTCOUNT_ADDR=0xEFFFFF0
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
+CONFIG_SYS_LOAD_ADDR=0x0
 CONFIG_DEBUG_UART=y
+CONFIG_REMAKE_ELF=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
 CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
 # CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_CLOCKS=y
+CONFIG_SPL_MAX_SIZE=0x30000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x100000
+CONFIG_SPL_BSS_MAX_SIZE=0x100000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_STACK=0xfffffe00
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="antminer> "
+CONFIG_SYS_MAXARGS=32
+CONFIG_SYS_PBSIZE=2075
 CONFIG_CMD_BOOTZ=y
+CONFIG_SYS_BOOTM_LEN=0x3c00000
 # CONFIG_CMD_ELF is not set
 # CONFIG_CMD_DM is not set
 # CONFIG_CMD_FLASH is not set
@@ -38,7 +54,9 @@ CONFIG_CMD_NAND_LOCK_UNLOCK=y
 CONFIG_CMD_PART=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
+CONFIG_BOOTP_MAY_FAIL=y
 # CONFIG_CMD_NFS is not set
+CONFIG_SYS_DISABLE_AUTOLOAD=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_PXE=y
@@ -48,10 +66,13 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
-CONFIG_DEFAULT_DEVICE_TREE="bitmain-antminer-s9"
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_FAT=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
+CONFIG_BOOTP_SERVERIP=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_FPGA_XILINX=y
@@ -62,10 +83,12 @@ CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ZYNQ=y
 CONFIG_NAND_ZYNQ_USE_BOOTLOADER1_TIMINGS=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_MII=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_DEBUG_UART_ZYNQ=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ARM_DCC=y
 CONFIG_ZYNQ_SERIAL=y
 # CONFIG_WATCHDOG is not set
 CONFIG_WDT=y