X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fat91sam9g10ek_nandflash_defconfig;h=0e3d0b13140ccb5afca12dea48c4227c4bf48749;hb=cd6a45a41fb2c19884ac87afade87b4d53601929;hp=9cdf3a2ee008a5aa22d0906665100f1ccc619935;hpb=de0bb2ba54929eb74b626a16d358eb2ac268a487;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/at91sam9g10ek_nandflash_defconfig b/configs/at91sam9g10ek_nandflash_defconfig
index 9cdf3a2..0e3d0b1 100644
--- a/configs/at91sam9g10ek_nandflash_defconfig
+++ b/configs/at91sam9g10ek_nandflash_defconfig
@@ -3,19 +3,19 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x21f00000
 CONFIG_SYS_MALLOC_LEN=0x80000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_AT91SAM9261EK=y
+CONFIG_ATMEL_LEGACY=y
 CONFIG_AT91SAM9G10=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
-CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH"
+CONFIG_DEBUG_UART=y
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
@@ -23,7 +23,10 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=281
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_LOADS is not set
@@ -45,7 +48,6 @@ CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
@@ -58,3 +60,6 @@ CONFIG_ATMEL_USART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_USB=y
+CONFIG_SYS_USB_OHCI_SLOT_NAME="at91sam9261"
+CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS=2
+CONFIG_USB_ATMEL=y