X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fat91sam9g10ek_dataflash_cs0_defconfig;h=8559fee396284085127fdb7e9ead224e2c748675;hb=898bd53e6a930080cee7cd7b1a09120c4dfd9467;hp=65e8fab55922e6f93b5e8e0f75c2914cceb9e890;hpb=795f8fd0b591eef7cf3f8c6fcf9788280029cc4a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/at91sam9g10ek_dataflash_cs0_defconfig b/configs/at91sam9g10ek_dataflash_cs0_defconfig
index 65e8fab..8559fee 100644
--- a/configs/at91sam9g10ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9g10ek_dataflash_cs0_defconfig
@@ -1,41 +1,48 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x21f00000
+CONFIG_TEXT_BASE=0x21f00000
+CONFIG_SYS_MALLOC_LEN=0x2d000
 CONFIG_TARGET_AT91SAM9261EK=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ATMEL_LEGACY=y
+CONFIG_AT91SAM9G10=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x4200
 CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
-CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
+CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS0"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_RESET_PHY_R=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=281
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
+CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_USE_ENV_SPI_MAX_HZ=y
 CONFIG_ENV_SPI_MAX_HZ=15000000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
+CONFIG_NET_RETRY_COUNT=20
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
@@ -54,4 +61,5 @@ CONFIG_ATMEL_USART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_USB=y
-CONFIG_USB_STORAGE=y
+CONFIG_SYS_USB_OHCI_SLOT_NAME="at91sam9261"
+CONFIG_USB_ATMEL=y