X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fat91sam9261ek_dataflash_cs3_defconfig;h=1277d49b7e12aaaf74a24ea5d7bd1e35e46efb1b;hb=970bf8603b877e2b66170290f751f9c23c120838;hp=449497015334b0862f48f798d0f69fd3aa1b9da2;hpb=554e5514ac00f204282c4a2376ae65935d104e60;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/at91sam9261ek_dataflash_cs3_defconfig b/configs/at91sam9261ek_dataflash_cs3_defconfig
index 4494970..1277d49 100644
--- a/configs/at91sam9261ek_dataflash_cs3_defconfig
+++ b/configs/at91sam9261ek_dataflash_cs3_defconfig
@@ -1,23 +1,27 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_AT91=y
 CONFIG_SYS_TEXT_BASE=0x21f00000
-CONFIG_TARGET_AT91SAM9261EK=y
+CONFIG_SYS_MALLOC_LEN=0x2d000
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_AT91SAM9261EK=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x4200
 CONFIG_ENV_OFFSET=0x4200
 CONFIG_ENV_SECT_SIZE=0x210
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
 CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS3"
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2"
-# CONFIG_CONSOLE_MUX is not set
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="sf probe 0:3; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SYS_PROMPT="U-Boot> "
@@ -25,7 +29,6 @@ CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
@@ -43,7 +46,6 @@ CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
-# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
@@ -58,5 +60,3 @@ CONFIG_DM_SPI=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_LCD=y