X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fam335x_shc_defconfig;h=a6acf35d9772855cde3c06404ea10bba1b5ce724;hb=10f6e4dc3a16c21f235416f975ecf2070ceb351f;hp=3158c556519c19b7110d5d1574f082032d757a51;hpb=8bc51b6e17426ba64d2cf10ec1f5357b8754ea9a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/am335x_shc_defconfig b/configs/am335x_shc_defconfig
index 3158c55..9f5924e 100644
--- a/configs/am335x_shc_defconfig
+++ b/configs/am335x_shc_defconfig
@@ -1,45 +1,80 @@
 CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x7000
+CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
 CONFIG_AM33XX=y
 CONFIG_TARGET_AM335X_SHC=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-# CONFIG_SPL_NAND_SUPPORT is not set
-CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_ENV_OFFSET_REDUND=0x9000
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SERIES=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
+CONFIG_TIMESTAMP=y
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n"
+CONFIG_AUTOBOOT_DELAY_STR="shc"
+CONFIG_AUTOBOOT_STOP_STR="noautoboot"
+CONFIG_BOOT_RETRY=y
+CONFIG_BOOT_RETRY_TIME=30
+CONFIG_RESET_TO_RETRY=y
+CONFIG_BOOTCOMMAND="if mmc dev 1; mmc rescan; then run emmc_setup; else echo ERROR: eMMC device not detected!; panic; fi; if run loaduimage; then run mmcboot; else echo ERROR Unable to load uImage from eMMC!; echo Performing Rollback!; setenv _active_ ${active_root}; setenv _inactive_ ${inactive_root}; setenv active_root ${_inactive_}; setenv inactive_root ${_active_}; saveenv; reset; fi; "
+CONFIG_DEFAULT_FDT_FILE="am335x-shc"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_SPL_EXT_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_SYS_SPL_MALLOC_SIZE=0x800000
+CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_I2C=y
+# CONFIG_SPL_NAND_SUPPORT is not set
 CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_FALCON_BOOT_MMCSD=y
+CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
+CONFIG_SPL_POWER=y
+CONFIG_SPL_WATCHDOG=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set
 CONFIG_SYS_PROMPT="U-Boot# "
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n"
-CONFIG_AUTOBOOT_DELAY_STR="shc"
-CONFIG_AUTOBOOT_STOP_STR="noautoboot"
-# CONFIG_CMD_FLASH is not set
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=1049
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
+# CONFIG_CMD_PINMUX is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_BOOTP_DNS2=y
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_NET_RETRY_COUNT=10
+CONFIG_BOOTP_SEND_HOSTNAME=y
+CONFIG_SYS_I2C_LEGACY=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_SLAVE=0x1
+CONFIG_SYS_I2C_SPEED=400000
 CONFIG_MMC_OMAP_HS=y
 CONFIG_PHY_ADDR_ENABLE=y
+CONFIG_PHY_SMSC=y
+CONFIG_DM_ETH=y
+CONFIG_MII=y
 CONFIG_DRIVER_TI_CPSW=y
-CONFIG_SYS_NS16550=y
-CONFIG_OMAP3_SPI=y
-CONFIG_FAT_WRITE=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PMIC_TPS65217=y
 CONFIG_LZO=y
-CONFIG_OF_LIBFDT=y