X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2Fa3y17lte_defconfig;h=42fcd2a3d317f2ae975a0e3b1fbc60bf2aeb519e;hb=7314ba2bf8452df68d07f251aa59440de58067b0;hp=36404d15f7113d72e18c97f45d419a323b183626;hpb=50bff6a6f86669a8652e2bf271eeb04f77911274;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/a3y17lte_defconfig b/configs/a3y17lte_defconfig
index 36404d1..42fcd2a 100644
--- a/configs/a3y17lte_defconfig
+++ b/configs/a3y17lte_defconfig
@@ -1,24 +1,27 @@
 CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="exynos78x0-common"
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=26000000
 CONFIG_ARCH_EXYNOS=y
+CONFIG_TEXT_BASE=0x40001000
+CONFIG_SYS_MALLOC_F_LEN=0x400
 CONFIG_ARCH_EXYNOS7=y
-CONFIG_S5P=y
 CONFIG_TARGET_A3Y17LTE=y
-# This option is a number of 256MB DRAM banks, i.e. (ram size) / 256MB.
-# Used in samsung common board dram_init function.
 CONFIG_NR_DRAM_BANKS=8
-CONFIG_SYS_CONFIG_NAME="exynos78x0-common"
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x40200e50
 CONFIG_DEFAULT_DEVICE_TREE="exynos78x0-axy17lte"
-CONFIG_SYS_TEXT_BASE=0x40001000
 CONFIG_SYS_LOAD_ADDR=0x40001000
-CONFIG_HUSH_PARSER=y
 CONFIG_FIT=y
-CONFIG_BOARD_EARLY_INIT_F=n
-CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
+CONFIG_SAVE_PREV_BL_FDT_ADDR=y
+CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PBSIZE=1024
+CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_CMD_GPIO=y
-CONFIG_DISPLAY_CPUINFO=n
 CONFIG_CMD_I2C=y
 CONFIG_DM_I2C_GPIO=y
-CONFIG_PINCTRL_EXYNOS78x0=y
-CONFIG_PINCTRL_EXYNOS=y
-# CONFIG_DEBUG_UART_S5P=y
-# CONFIG_DEBUG_UART_BASE=0x13820000
\ No newline at end of file
+CONFIG_LMB_MAX_REGIONS=64