X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2FT2080RDB_NAND_defconfig;h=6566226abc8581a2908813accbada7d654e0cd88;hb=3dc2987f5c9b79e19ea6b0e69e01a817310abaac;hp=1c55d30b5e18b61ff1869a03ae3f40f99bff8e50;hpb=24b628a8f844868adca897aae40af6f98cdbc26d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig
index 1c55d30..6566226 100644
--- a/configs/T2080RDB_NAND_defconfig
+++ b/configs/T2080RDB_NAND_defconfig
@@ -1,9 +1,7 @@
 CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00201000
+CONFIG_SYS_TEXT_BASE=0x00200000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MEMTEST_START=0x00200000
-CONFIG_SYS_MEMTEST_END=0x00400000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
@@ -17,8 +15,22 @@ CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_T2080RDB=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y
+<<<<<<< HEAD
+=======
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
+CONFIG_PCIE4=y
+CONFIG_VID=y
+CONFIG_VID_FLS_ENV="t208xrdb_vdd_mv"
+CONFIG_VOL_MONITOR_IR36021_READ=y
+CONFIG_VOL_MONITOR_IR36021_SET=y
+>>>>>>> Convert CONFIG_PCIE1 et al to Kconfig
+CONFIG_SYS_MEMTEST_START=0x00200000
+CONFIG_SYS_MEMTEST_END=0x00400000
 CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -30,15 +42,27 @@ CONFIG_SYS_FSL_PBL_RCW="board/freescale/t208xrdb/t2080_nand_rcw.cfg"
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;setenv ramdiskaddr 0x02000000;setenv fdtaddr 0x00c00000;setenv loadaddr 0x1000000;bootm $loadaddr $ramdiskaddr $fdtaddr"
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_MAX_SIZE=0x28000
+CONFIG_SPL_PAD_TO=0x40000
 CONFIG_SPL_NAND_BOOT=y
 CONFIG_SPL_FSL_PBL=y
+CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
+CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_SKIP_RELOCATE=y
+CONFIG_SPL_GD_ADDR=0xfffc8000
+CONFIG_SPL_RELOC_STACK=0xfffd8000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xfffcb000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0xc800
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_CMD_MEMTEST=y
@@ -59,7 +83,12 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),9
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="FM1@DTSEC3"
 CONFIG_DM=y
+CONFIG_FSL_SATA_V2=y
 CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
@@ -114,6 +143,7 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_USB_STORAGE=y
 CONFIG_ADDR_MAP=y
 CONFIG_SYS_NUM_ADDR_MAP=64