X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2FP3041DS_NAND_defconfig;h=dd399466728a47d6d761a32afd5f565367ff5a7d;hb=b8e09898919e23c5d7f1934be7bf9a3a6f0deb0e;hp=3b6585a95a2ce101316b5862c5d3265f3edabd07;hpb=2abf048ab7b835787d6627423559832f2b18f253;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/P3041DS_NAND_defconfig b/configs/P3041DS_NAND_defconfig
index 3b6585a..dd39946 100644
--- a/configs/P3041DS_NAND_defconfig
+++ b/configs/P3041DS_NAND_defconfig
@@ -7,6 +7,13 @@ CONFIG_DEFAULT_DEVICE_TREE="p3041ds"
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P3041DS=y
 CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_BOOK3E_HV=y
+CONFIG_SYS_CACHE_STASHING=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
+CONFIG_PCIE4=y
 CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -19,10 +26,12 @@ CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p3041ds.cfg"
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_ID_EEPROM=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_I2C=y
@@ -39,9 +48,13 @@ CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="FM1@DTSEC1"
 CONFIG_DM=y
+CONFIG_FSL_SATA_V2=y
 CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
+CONFIG_SYS_SPD_BUS_NUM=1
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
 CONFIG_SYS_BR0_PRELIM_BOOL=y
@@ -65,7 +78,10 @@ CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_EMPTY_INFO=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_FLASH_QUIET_TEST=y
+CONFIG_SYS_MAX_FLASH_SECT=1024
 CONFIG_SYS_MAX_FLASH_BANKS=2
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_ELBC=y
@@ -90,6 +106,7 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_USB_STORAGE=y
 CONFIG_ADDR_MAP=y
 CONFIG_SYS_NUM_ADDR_MAP=64