X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2FP2041RDB_NAND_defconfig;h=4b038f0aeb4a5f4f380ef799be398bc60402ab61;hb=HEAD;hp=193e4717478208ea70ca89aee032c14c833b8618;hpb=284c1a9b4b91120385c346a1924628a695314905;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig
index 193e471..4b038f0 100644
--- a/configs/P2041RDB_NAND_defconfig
+++ b/configs/P2041RDB_NAND_defconfig
@@ -1,12 +1,27 @@
 CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFFF40000
+CONFIG_TEXT_BASE=0xFFF40000
 CONFIG_SYS_MALLOC_LEN=0x100000
+CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0xE0000
 CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_MPC85xx=y
+CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
+CONFIG_SRIO2=y
+CONFIG_SRIO_PCIE_BOOT_MASTER=y
 CONFIG_TARGET_P2041RDB=y
 CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_BOOK3E_HV=y
+CONFIG_SYS_CACHE_STASHING=y
+CONFIG_USE_UBOOTPATH=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_PCIE3=y
+CONFIG_SYS_FSL_NUM_CC_PLLS=2
 CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
@@ -14,8 +29,8 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_RAMBOOT_PBL=y
-CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg"
-CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p2041rdb.cfg"
+CONFIG_SYS_FSL_PBL_PBI="board/freescale/p2041rdb/pbi.cfg"
+CONFIG_SYS_FSL_PBL_RCW="board/freescale/p2041rdb/rcw_p2041rdb.cfg"
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
@@ -30,6 +45,8 @@ CONFIG_CMD_GREPENV=y
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
@@ -45,7 +62,7 @@ CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="FM1@DTSEC1"
-CONFIG_DM=y
+CONFIG_USE_ROOTPATH=y
 CONFIG_FSL_SATA_V2=y
 CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
@@ -67,17 +84,18 @@ CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_EMPTY_INFO=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_FLASH_QUIET_TEST=y
+CONFIG_SYS_MAX_FLASH_SECT=1024
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_ELBC=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHYLIB=y
 CONFIG_PHYLIB_10G=y
 CONFIG_PHY_TERANETICS=y
 CONFIG_PHY_VITESSE=y
-CONFIG_DM_ETH=y
 CONFIG_DM_MDIO=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
@@ -86,7 +104,7 @@ CONFIG_SYS_FMAN_FW_ADDR=0x100000
 CONFIG_MII=y
 CONFIG_PCIE_FSL=y
 CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550=y
+CONFIG_SYS_NS16550_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
@@ -96,3 +114,4 @@ CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_USB_STORAGE=y
 CONFIG_ADDR_MAP=y
 CONFIG_SYS_NUM_ADDR_MAP=64
+CONFIG_POST=y