X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2FP2020RDB-PC_NAND_defconfig;h=2ab9a1399e49560774e827376cb59e7cee1ed5f0;hb=aca1f6789aa2e384a58909fa7a9696db9d607675;hp=9de2f762c39e5e53c9a1ebaa64dd9f15c1f08321;hpb=fe04d885fb540b614a2f989e16e808b300ccb52e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig
index 9de2f76..2ab9a13 100644
--- a/configs/P2020RDB-PC_NAND_defconfig
+++ b/configs/P2020RDB-PC_NAND_defconfig
@@ -1,24 +1,25 @@
 CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
+CONFIG_SYS_TEXT_BASE=0x11000000
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc"
 CONFIG_SPL_TEXT_BASE=0xFF800000
 CONFIG_SPL_SERIAL=y
-CONFIG_TPL_TEXT_BASE=0xF8F81000
+CONFIG_TPL_TEXT_BASE=0xF8F80000
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_TPL_SERIAL=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 # CONFIG_CMD_ERRATA is not set
 CONFIG_TARGET_P2020RDB=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xF8F80000
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
@@ -26,16 +27,30 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_MISC_INIT_R is not set
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_MAX_SIZE=0x1000
 CONFIG_SPL_NAND_BOOT=y
+CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
+CONFIG_SPL_INIT_MINIMAL=y
+CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xf8ffe000
+CONFIG_SPL_RELOC_STACK=0xf8fffff0
+CONFIG_TPL_GD_ADDR=0xf8fac000
+CONFIG_TPL_RELOC_TEXT_BASE=0xf8f80000
+CONFIG_TPL_RELOC_STACK=0xf8fb0000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_TARGET="u-boot-with-spl.bin"
 CONFIG_TPL=y
+CONFIG_TPL_MAX_SIZE=0x20000
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C=y
 CONFIG_TPL_MPC8XXX_INIT_DDR=y
 CONFIG_TPL_NAND_SUPPORT=y
-CONFIG_TPL_SERIAL=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTO_COMPLETE is not set
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
@@ -45,7 +60,6 @@ CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_MP=y
 # CONFIG_CMD_HASH is not set
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
@@ -56,8 +70,14 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="eTSEC1"
 CONFIG_DM=y
+CONFIG_LBA48=y
 CONFIG_DDR_CLK_FREQ=66666666
+CONFIG_CHIP_SELECTS_PER_CTRL=1
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xFF800C21
 CONFIG_SYS_OR0_PRELIM=0xFFFF8396
@@ -70,6 +90,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF
 CONFIG_SYS_BR3_PRELIM_BOOL=y
 CONFIG_SYS_BR3_PRELIM=0xFFA00801
 CONFIG_SYS_OR3_PRELIM=0xFFF009F7
+CONFIG_TPL_COMMON_INIT_DDR=y
 CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_TPL_SYS_I2C_LEGACY=y