X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2FP2020RDB-PC_NAND_defconfig;h=2558596b161aca17330543c530df5fb66bae13e0;hb=3dc2987f5c9b79e19ea6b0e69e01a817310abaac;hp=3b57b0c1a640b7866319e23d1dc173854e39fa73;hpb=6f004adaf6f80b64f20bc2ed64615610588f3154;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/P2020RDB-PC_NAND_defconfig b/configs/P2020RDB-PC_NAND_defconfig
index 3b57b0c..2558596 100644
--- a/configs/P2020RDB-PC_NAND_defconfig
+++ b/configs/P2020RDB-PC_NAND_defconfig
@@ -1,38 +1,61 @@
 CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
+CONFIG_SYS_TEXT_BASE=0x11000000
+CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x100000
-CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="p2020rdb-pc"
 CONFIG_SPL_TEXT_BASE=0xFF800000
 CONFIG_SPL_SERIAL=y
+CONFIG_TPL_TEXT_BASE=0xF8F80000
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_TPL_SERIAL=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 # CONFIG_CMD_ERRATA is not set
 CONFIG_TARGET_P2020RDB=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xF8F80000
 CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_MISC_INIT_R is not set
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_MAX_SIZE=0x1000
 CONFIG_SPL_NAND_BOOT=y
+CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
+CONFIG_SPL_INIT_MINIMAL=y
+CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xf8ffe000
+CONFIG_SPL_RELOC_STACK=0xf8fffff0
+CONFIG_TPL_GD_ADDR=0xf8fac000
+CONFIG_TPL_RELOC_TEXT_BASE=0xf8f80000
+CONFIG_TPL_RELOC_STACK=0xf8fb0000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_TARGET="u-boot-with-spl.bin"
 CONFIG_TPL=y
+CONFIG_TPL_MAX_SIZE=0x20000
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C=y
 CONFIG_TPL_MPC8XXX_INIT_DDR=y
 CONFIG_TPL_NAND_SUPPORT=y
-CONFIG_TPL_SERIAL=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTO_COMPLETE is not set
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
@@ -42,7 +65,6 @@ CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_MP=y
 # CONFIG_CMD_HASH is not set
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
@@ -52,9 +74,31 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=ef000000.nor:256k(vsc7385-firmware),256k(dtb),
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0xc000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="eTSEC1"
 CONFIG_DM=y
+CONFIG_LBA48=y
 CONFIG_DDR_CLK_FREQ=66666666
+CONFIG_SYS_SPD_BUS_NUM=1
+CONFIG_CHIP_SELECTS_PER_CTRL=1
+CONFIG_SYS_DDR_RAW_TIMING=y
+CONFIG_SYS_BR0_PRELIM_BOOL=y
+CONFIG_SYS_BR0_PRELIM=0xFF800C21
+CONFIG_SYS_OR0_PRELIM=0xFFFF8396
+CONFIG_SYS_BR1_PRELIM_BOOL=y
+CONFIG_SYS_BR1_PRELIM=0xEF001001
+CONFIG_SYS_OR1_PRELIM=0xFC000FF7
+CONFIG_SYS_BR2_PRELIM_BOOL=y
+CONFIG_SYS_BR2_PRELIM=0xFFB00801
+CONFIG_SYS_OR2_PRELIM=0xFFFE09FF
+CONFIG_SYS_BR3_PRELIM_BOOL=y
+CONFIG_SYS_BR3_PRELIM=0xFFA00801
+CONFIG_SYS_OR3_PRELIM=0xFFF009F7
+CONFIG_TPL_COMMON_INIT_DDR=y
 CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_TPL_SYS_I2C_LEGACY=y
@@ -72,8 +116,11 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_ELBC=y
+CONFIG_SYS_NAND_BLOCK_SIZE=0x4000
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_ATHEROS=y
@@ -99,4 +146,5 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_STORAGE=y