X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2FP1020RDB-PD_defconfig;h=c39509e4acd4c9a564f0406326b5eb8426e92b17;hb=3dc2987f5c9b79e19ea6b0e69e01a817310abaac;hp=c79d599b60999b4d001bfa399d5ee08de161e9f7;hpb=306881a0bfca22798da64f55206ef2824f37efed;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig
index c79d599..ef31e09 100644
--- a/configs/P1020RDB-PD_defconfig
+++ b/configs/P1020RDB-PD_defconfig
@@ -1,30 +1,41 @@
 CONFIG_PPC=y
 CONFIG_SYS_TEXT_BASE=0xEFF40000
+CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd"
+CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_MPC85xx=y
 # CONFIG_CMD_ERRATA is not set
 CONFIG_TARGET_P1020RDB_PD=y
 CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
+CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_FSL_FIXED_MMC_LOCATION=y
 CONFIG_BOOTDELAY=10
-# CONFIG_MISC_INIT_R is not set
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_MISC_INIT_R is not set
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTO_COMPLETE is not set
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
 # CONFIG_CMD_HASH is not set
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
@@ -32,11 +43,37 @@ CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nor0=ec000000.nor"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=ec000000.nor:128k(dtb),6016k(kernel),57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd"
+CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="eTSEC1"
 CONFIG_DM=y
-CONFIG_DM_MMC=y
+CONFIG_LBA48=y
+CONFIG_DDR_CLK_FREQ=66666666
+CONFIG_SYS_SPD_BUS_NUM=1
+CONFIG_CHIP_SELECTS_PER_CTRL=2
+CONFIG_SYS_DDR_RAW_TIMING=y
+CONFIG_SYS_BR0_PRELIM_BOOL=y
+CONFIG_SYS_BR0_PRELIM=0xEC001001
+CONFIG_SYS_OR0_PRELIM=0xFC000FF7
+CONFIG_SYS_BR2_PRELIM_BOOL=y
+CONFIG_SYS_BR2_PRELIM=0xFFB00801
+CONFIG_SYS_OR2_PRELIM=0xFFFE09FF
+CONFIG_SYS_BR3_PRELIM_BOOL=y
+CONFIG_SYS_BR3_PRELIM=0xFFA00801
+CONFIG_SYS_OR3_PRELIM=0xFFF009F7
+CONFIG_COMMON_INIT_DDR=y
+CONFIG_SPL_COMMON_INIT_DDR=y
+CONFIG_DM_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_FSL=y
+CONFIG_SYS_FSL_I2C_OFFSET=0x3000
+CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
+CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
+CONFIG_SYS_I2C_EEPROM_ADDR=0x52
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
@@ -44,8 +81,7 @@ CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_ATHEROS=y
@@ -57,15 +93,19 @@ CONFIG_PHY_NATSEMI=y
 CONFIG_PHY_REALTEK=y
 CONFIG_PHY_SMSC=y
 CONFIG_PHY_VITESSE=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_FSL=y
+CONFIG_DM_RTC=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_STORAGE=y