X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2FP1020RDB-PD_SPIFLASH_defconfig;h=4c3824732467fae43447c52f0551d134eaed27e8;hb=aca1f6789aa2e384a58909fa7a9696db9d607675;hp=8c049ab141838fca90d33e6de782b6695e24a655;hpb=2a736066687168f17a5a92c3b08d16bafc464954;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/P1020RDB-PD_SPIFLASH_defconfig b/configs/P1020RDB-PD_SPIFLASH_defconfig
index 8c049ab..4c38247 100644
--- a/configs/P1020RDB-PD_SPIFLASH_defconfig
+++ b/configs/P1020RDB-PD_SPIFLASH_defconfig
@@ -1,36 +1,50 @@
 CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
+CONFIG_SYS_TEXT_BASE=0x11000000
+CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd"
-CONFIG_SPL_TEXT_BASE=0xf8f81000
+CONFIG_SPL_TEXT_BASE=0xf8f80000
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_SPI=y
 CONFIG_MPC85xx=y
 # CONFIG_CMD_ERRATA is not set
 CONFIG_TARGET_P1020RDB_PD=y
+CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
+CONFIG_SPL_SYS_MONITOR_BASE=0xF8F80000
+CONFIG_SPIFLASH=y
 CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_MISC_INIT_R is not set
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_MAX_SIZE=0x20000
 CONFIG_SPL_SPI_BOOT=y
+CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
+CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_GD_ADDR=0xf8f9c000
+CONFIG_SPL_RELOC_STACK=0xf8f9d000
+CONFIG_SPL_RELOC_MALLOC=y
+CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
+CONFIG_SPL_RELOC_MALLOC_SIZE=0x1b000
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR=y
+CONFIG_SPL_TARGET="u-boot-with-spl.bin"
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTO_COMPLETE is not set
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
@@ -39,7 +53,6 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_MP=y
 # CONFIG_CMD_HASH is not set
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y
@@ -50,8 +63,24 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="eTSEC1"
 CONFIG_DM=y
+CONFIG_LBA48=y
 CONFIG_DDR_CLK_FREQ=66666666
+CONFIG_CHIP_SELECTS_PER_CTRL=2
+CONFIG_SYS_BR0_PRELIM_BOOL=y
+CONFIG_SYS_BR0_PRELIM=0xEC001001
+CONFIG_SYS_OR0_PRELIM=0xFC000FF7
+CONFIG_SYS_BR2_PRELIM_BOOL=y
+CONFIG_SYS_BR2_PRELIM=0xFFB00801
+CONFIG_SYS_OR2_PRELIM=0xFFFE09FF
+CONFIG_SYS_BR3_PRELIM_BOOL=y
+CONFIG_SYS_BR3_PRELIM=0xFFA00801
+CONFIG_SYS_OR3_PRELIM=0xFFF009F7
+CONFIG_SPL_COMMON_INIT_DDR=y
 CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
@@ -68,7 +97,6 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_ATHEROS=y
@@ -94,4 +122,5 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_STORAGE=y