X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2FP1020RDB-PC_NAND_defconfig;h=0945f4fc511634e31a598871d60b8586ec9ce197;hb=b8e09898919e23c5d7f1934be7bf9a3a6f0deb0e;hp=9d44ea6dae5524f86a56ab8bdca27507380e0163;hpb=a958c58571ef2af420f482f47a34924d75510065;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/P1020RDB-PC_NAND_defconfig b/configs/P1020RDB-PC_NAND_defconfig
index 9d44ea6..0945f4f 100644
--- a/configs/P1020RDB-PC_NAND_defconfig
+++ b/configs/P1020RDB-PC_NAND_defconfig
@@ -1,25 +1,31 @@
 CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
+CONFIG_SYS_TEXT_BASE=0x11000000
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc"
 CONFIG_SPL_TEXT_BASE=0xFF800000
 CONFIG_SPL_SERIAL=y
-CONFIG_TPL_TEXT_BASE=0xF8F81000
+CONFIG_TPL_TEXT_BASE=0xF8F80000
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_TPL_SERIAL=y
 CONFIG_SPL=y
+CONFIG_TPL_MAX_SIZE=0x20000
 CONFIG_MPC85xx=y
 # CONFIG_CMD_ERRATA is not set
 CONFIG_TARGET_P1020RDB_PC=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
 CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xF8F80000
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
@@ -27,16 +33,29 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_MISC_INIT_R is not set
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_MAX_SIZE=0x1000
 CONFIG_SPL_NAND_BOOT=y
+CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
+CONFIG_SPL_INIT_MINIMAL=y
+CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xf8fbe000
+CONFIG_SPL_RELOC_STACK=0xf8fbfff0
+CONFIG_TPL_GD_ADDR=0xf8fac000
+CONFIG_TPL_RELOC_TEXT_BASE=0xf8f80000
+CONFIG_TPL_RELOC_STACK=0xf8fb0000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_TARGET="u-boot-with-spl.bin"
 CONFIG_TPL=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C=y
 CONFIG_TPL_MPC8XXX_INIT_DDR=y
 CONFIG_TPL_NAND_SUPPORT=y
-CONFIG_TPL_SERIAL=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTO_COMPLETE is not set
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
@@ -51,14 +70,18 @@ CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0xc000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="eTSEC1"
 CONFIG_DM=y
+CONFIG_LBA48=y
 CONFIG_DDR_CLK_FREQ=66666666
+CONFIG_SYS_SPD_BUS_NUM=1
 CONFIG_CHIP_SELECTS_PER_CTRL=1
+CONFIG_SYS_DDR_RAW_TIMING=y
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xFF800C21
 CONFIG_SYS_OR0_PRELIM=0xFFFF8396
@@ -71,6 +94,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF
 CONFIG_SYS_BR3_PRELIM_BOOL=y
 CONFIG_SYS_BR3_PRELIM=0xFFA00801
 CONFIG_SYS_OR3_PRELIM=0xFFF009F7
+CONFIG_TPL_COMMON_INIT_DDR=y
 CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_TPL_SYS_I2C_LEGACY=y
@@ -85,7 +109,10 @@ CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_EMPTY_INFO=y
 CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_FLASH_QUIET_TEST=y
+CONFIG_SYS_MAX_FLASH_SECT=128
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_ELBC=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x4000
@@ -118,4 +145,5 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_MAX_CONTROLLER_COUNT=2
 CONFIG_USB_STORAGE=y