X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=configs%2FP1020RDB-PC_36BIT_NAND_defconfig;h=54246f0397dc3d5df57a5f4699d0c4098cc35929;hb=aca1f6789aa2e384a58909fa7a9696db9d607675;hp=56b984e5ae685becc791cc3f770f931a8bd6a47a;hpb=ab37df9d221e12adf709c7391c001b9dd5d33606;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/P1020RDB-PC_36BIT_NAND_defconfig b/configs/P1020RDB-PC_36BIT_NAND_defconfig
index 56b984e..54246f0 100644
--- a/configs/P1020RDB-PC_36BIT_NAND_defconfig
+++ b/configs/P1020RDB-PC_36BIT_NAND_defconfig
@@ -1,13 +1,12 @@
 CONFIG_PPC=y
-CONFIG_SYS_IMMR=0xFFE00000
-CONFIG_SYS_TEXT_BASE=0x11001000
+CONFIG_SYS_TEXT_BASE=0x11000000
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pc_36b"
 CONFIG_SPL_TEXT_BASE=0xFF800000
 CONFIG_SPL_SERIAL=y
-CONFIG_TPL_TEXT_BASE=0xF8F81000
+CONFIG_TPL_TEXT_BASE=0xF8F80000
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
 CONFIG_TPL_SERIAL=y
@@ -21,7 +20,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_TPL_SYS_MONITOR_BASE=0xF8F81000
+CONFIG_TPL_SYS_MONITOR_BASE=0xF8F80000
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
@@ -29,15 +28,30 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_MISC_INIT_R is not set
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_MAX_SIZE=0x1000
 CONFIG_SPL_NAND_BOOT=y
+CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
+CONFIG_SPL_INIT_MINIMAL=y
+CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xf8fbe000
+CONFIG_SPL_RELOC_STACK=0xf8fbfff0
+CONFIG_TPL_GD_ADDR=0xf8fac000
+CONFIG_TPL_RELOC_TEXT_BASE=0xf8f80000
+CONFIG_TPL_RELOC_STACK=0xf8fb0000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xf8fb4000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_TARGET="u-boot-with-spl.bin"
 CONFIG_TPL=y
+CONFIG_TPL_MAX_SIZE=0x20000
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C=y
 CONFIG_TPL_MPC8XXX_INIT_DDR=y
 CONFIG_TPL_NAND_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTO_COMPLETE is not set
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
@@ -58,6 +72,7 @@ CONFIG_BOOTFILE="uImage"
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="eTSEC1"
 CONFIG_DM=y
+CONFIG_LBA48=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_CHIP_SELECTS_PER_CTRL=1
 CONFIG_SYS_BR0_PRELIM_BOOL=y
@@ -72,6 +87,7 @@ CONFIG_SYS_OR2_PRELIM=0xFFFE09FF
 CONFIG_SYS_BR3_PRELIM_BOOL=y
 CONFIG_SYS_BR3_PRELIM=0xFFA00801
 CONFIG_SYS_OR3_PRELIM=0xFFF009F7
+CONFIG_TPL_COMMON_INIT_DDR=y
 CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_TPL_SYS_I2C_LEGACY=y