X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=common%2Fcmd_i2c.c;h=10cab4609a5da87c2d7a1fc67db302d40f4991b9;hb=feaa43f3a8f465cbf01ffa1b23b6b52431819a52;hp=45cfde2eb840aeb0585dc2abdf07ae03ea5c94de;hpb=32081125a028aff9e93af5281c777b0745ef8558;p=platform%2Fkernel%2Fu-boot.git

diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 45cfde2..10cab46 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -86,9 +86,6 @@
 #include <i2c.h>
 #include <asm/byteorder.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
-
-
 /* Display values from last command.
  * Memory modify remembered values are different from display memory.
  */
@@ -657,7 +654,7 @@ int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
  * The SDRAM command is separately configured because many
  * (most?) embedded boards don't use SDRAM DIMMs.
  */
-#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
+#if defined(CONFIG_CMD_SDRAM)
 
 /*
  * Syntax:
@@ -701,6 +698,7 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	switch(data[2]) {
 		case 2:  puts ("EDO\n");	break;
 		case 4:  puts ("SDRAM\n");	break;
+		case 8:  puts ("DDR2\n");	break;
 		default: puts ("unknown\n");	break;
 	}
 	puts ("Row address bits             ");
@@ -722,6 +720,7 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		case 2:  puts ("HSTL 1.5\n");	break;
 		case 3:  puts ("SSTL 3.3\n");	break;
 		case 4:  puts ("SSTL 2.5\n");	break;
+		case 5:  puts ("SSTL 1.8\n");	break;
 		default: puts ("unknown\n");	break;
 	}
 	printf("SDRAM cycle time             %d.%d nS\n",
@@ -875,7 +874,7 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	return 0;
 }
-#endif	/* CFG_CMD_SDRAM */
+#endif
 
 #if defined(CONFIG_I2C_CMD_TREE)
 #if defined(CONFIG_I2C_MULTI_BUS)
@@ -936,10 +935,10 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		return do_i2c_probe(cmdtp, flag, --argc, ++argv);
 	if (!strncmp(argv[1], "lo", 2))
 		return do_i2c_loop(cmdtp, flag, --argc, ++argv);
-#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
+#if defined(CONFIG_CMD_SDRAM)
 	if (!strncmp(argv[1], "sd", 2))
 		return do_sdram(cmdtp, flag, --argc, ++argv);
-#endif	/* CFG_CMD_SDRAM */
+#endif
 	else
 		printf ("Usage:\n%s\n", cmdtp->usage);
 	return 0;
@@ -948,6 +947,26 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 /***************************************************/
 
+#if defined(CONFIG_I2C_CMD_TREE)
+U_BOOT_CMD(
+	i2c, 6, 1, do_i2c,
+ 	"i2c     - I2C sub-system\n",
+#if defined(CONFIG_I2C_MULTI_BUS)
+	"dev [dev] - show or set current I2C bus\n"
+#endif  /* CONFIG_I2C_MULTI_BUS */
+	"i2c speed [speed] - show or set I2C bus speed\n"
+	"i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
+	"i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
+	"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
+	"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
+	"i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
+	"i2c probe - show devices on the I2C bus\n"
+	"i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
+#if defined(CONFIG_CMD_SDRAM)
+	"i2c sdram chip - print SDRAM configuration information\n"
+#endif
+);
+#endif /* CONFIG_I2C_CMD_TREE */
 U_BOOT_CMD(
 	imd,	4,	1,	do_i2c_md,		\
 	"imd     - i2c memory display\n",				\
@@ -994,7 +1013,7 @@ U_BOOT_CMD(
 	"    - loop, reading a set of addresses\n"
 );
 
-#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
+#if defined(CONFIG_CMD_SDRAM)
 U_BOOT_CMD(
 	isdram,	2,	1,	do_sdram,
 	"isdram  - print SDRAM configuration information\n",
@@ -1002,26 +1021,3 @@ U_BOOT_CMD(
 	"      (valid chip values 50..57)\n"
 );
 #endif
-
-#if defined(CONFIG_I2C_CMD_TREE)
-U_BOOT_CMD(
-	i2c, 6, 1, do_i2c,
- 	"i2c     - I2C sub-system\n",
-#if defined(CONFIG_I2C_MULTI_BUS)
-	"dev [dev] - show or set current I2C bus\n"
-#endif  /* CONFIG_I2C_MULTI_BUS */
-	"i2c speed [speed] - show or set I2C bus speed\n"
-	"i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
-	"i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
-	"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
-	"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
-	"i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
-	"i2c probe - show devices on the I2C bus\n"
-	"i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
-#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
-	"i2c sdram chip - print SDRAM configuration information\n"
-#endif  /* CFG_CMD_SDRAM */
-);
-#endif  /* CONFIG_I2C_CMD_TREE */
-
-#endif	/* CFG_CMD_I2C */