X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=cmd%2Feeprom.c;h=7b1f81477fd83cd733e3d6d61bcedf95e9fe5189;hb=9403fc41c71fc4146ab0e890ed90b28fc053791f;hp=c61b396a62b5d3eb662d861e53b143691b22592d;hpb=be62fbf376261ab3a4ed5db3bf54d5df9e216d9f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/cmd/eeprom.c b/cmd/eeprom.c
index c61b396..7b1f814 100644
--- a/cmd/eeprom.c
+++ b/cmd/eeprom.c
@@ -1,8 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2000, 2001
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -60,6 +59,10 @@
 #endif
 #endif
 
+#if defined(CONFIG_DM_I2C)
+int eeprom_i2c_bus;
+#endif
+
 __weak int eeprom_write_enable(unsigned dev_addr, int state)
 {
 	return 0;
@@ -67,13 +70,10 @@ __weak int eeprom_write_enable(unsigned dev_addr, int state)
 
 void eeprom_init(int bus)
 {
-	/* SPI EEPROM */
-#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
-	spi_init_f();
-#endif
-
 	/* I2C EEPROM */
-#if defined(CONFIG_SYS_I2C)
+#if defined(CONFIG_DM_I2C)
+	eeprom_i2c_bus = bus;
+#elif defined(CONFIG_SYS_I2C)
 	if (bus >= 0)
 		i2c_set_bus_num(bus);
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
@@ -130,26 +130,32 @@ static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
 {
 	int ret = 0;
 
-	/* SPI */
-#if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
+#if defined(CONFIG_DM_I2C)
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(eeprom_i2c_bus, addr[0],
+				      alen - 1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       eeprom_i2c_bus);
+		return CMD_RET_FAILURE;
+	}
+
 	if (read)
-		spi_read(addr, alen, buffer, len);
+		ret = dm_i2c_read(dev, offset, buffer, len);
 	else
-		spi_write(addr, alen, buffer, len);
-#else	/* I2C */
+		ret = dm_i2c_write(dev, offset, buffer, len);
 
-#if defined(CONFIG_SYS_I2C_EEPROM_BUS)
-	i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS);
-#endif
+#else /* Non DM I2C support - will be removed */
 
 	if (read)
 		ret = i2c_read(addr[0], offset, alen - 1, buffer, len);
 	else
 		ret = i2c_write(addr[0], offset, alen - 1, buffer, len);
-
+#endif /* CONFIG_DM_I2C */
 	if (ret)
-		ret = 1;
-#endif
+		ret = CMD_RET_FAILURE;
+
 	return ret;
 }
 
@@ -161,6 +167,10 @@ static int eeprom_rw(unsigned dev_addr, unsigned offset, uchar *buffer,
 	int rcode = 0;
 	uchar addr[3];
 
+#if defined(CONFIG_SYS_I2C_EEPROM_BUS)
+	eeprom_init(CONFIG_SYS_I2C_EEPROM_BUS);
+#endif
+
 	while (offset < end) {
 		alen = eeprom_addr(dev_addr, offset, addr);