X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=cmd%2FKconfig;h=e2b0a4fbc011c5e8d5044206d37054af6bae525d;hb=117c7ee283f1c3f49306fb11939b59fe11cbf5a8;hp=6403bc45a5ef790726deff449330236f32c7e25f;hpb=c998cbea872f7ff9cc0a4887658112abe007bf94;p=platform%2Fkernel%2Fu-boot.git diff --git a/cmd/Kconfig b/cmd/Kconfig index 6403bc4..e2b0a4f 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -190,6 +190,20 @@ comment "Commands" menu "Info commands" +config CMD_ACPI + bool "acpi" + default y if ACPIGEN + help + List and dump ACPI tables. ACPI (Advanced Configuration and Power + Interface) is used mostly on x86 for providing information to the + Operating System about devices in the system. The tables are set up + by the firmware, typically U-Boot but possibly an earlier firmware + module, if U-Boot is chain-loaded from something else. ACPI tables + can also include code, to perform hardware-specific tasks required + by the Operating Systems. This allows some amount of separation + between the firmware and OS, and is particularly useful when you + want to make hardware changes without the OS needing to be adjusted. + config CMD_BDI bool "bdinfo" default y @@ -364,6 +378,7 @@ config CMD_BOOTEFI_HELLO_COMPILE config CMD_BOOTEFI_HELLO bool "Allow booting a standard EFI hello world for testing" depends on CMD_BOOTEFI_HELLO_COMPILE + default y if CMD_BOOTEFI_SELFTEST help This adds a standard EFI hello world application to U-Boot so that it can be used with the 'bootefi hello' command. This is useful @@ -399,6 +414,7 @@ config CMD_ABOOTIMG config CMD_ELF bool "bootelf, bootvx" default y + select LIB_ELF help Boot an ELF/vxWorks image from the memory. @@ -474,12 +490,6 @@ config CMD_SPL_WRITE_SIZE flash used by Falcon-mode boot. See the documentation until CMD_SPL for detail. -config CMD_FITUPD - bool "fitImage update command" - help - Implements the 'fitupd' command, which allows to automatically - store software updates present on a TFTP server in NOR Flash - config CMD_THOR_DOWNLOAD bool "thor - TIZEN 'thor' download" select DFU @@ -591,6 +601,7 @@ config CMD_NVEDIT_INFO This command can be optionally used for evaluation in scripts: [-d] : evaluate whether default environment is used [-p] : evaluate whether environment can be persisted + [-q] : quiet output The result of multiple evaluations will be combined with AND. endmenu @@ -702,6 +713,20 @@ config CMD_MEMORY base - print or set address offset loop - initialize loop on address range +config MEM_SEARCH + bool "ms - Memory search" + help + Memory-search command + + This allows searching through a region of memory looking for hex + data (byte, 16-bit word, 32-bit long, also 64-bit on machines that + support it). It is also possible to search for a string. The + command accepts a memory range and a list of values to search for. + The values need to appear in memory in the same order they are given + in the command. At most 10 matches can be returned at a time, but + pressing return will show the next 10 matches. Environment variables + are set for use with scripting (memmatches, memaddr, mempos). + config CMD_MX_CYCLIC bool "Enable cyclic md/mw commands" depends on CMD_MEMORY @@ -735,6 +760,22 @@ config SYS_ALT_MEMTEST help Use a more complete alternative memory test. +config SYS_MEMTEST_START + hex "default start address for mtest" + default 0 + help + This is the default start address for mtest for simple read/write + test. If no arguments are given to mtest, default address is used + as start address. + +config SYS_MEMTEST_END + hex "default end address for mtest" + default 0x1000 + help + This is the default end address for mtest for simple read/write + test. If no arguments are given to mtest, default address is used + as end address. + endif config CMD_SHA1SUM @@ -769,14 +810,23 @@ config CMD_LZMADEC Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm) image from memory. +config CMD_UNLZ4 + bool "unlz4" + default y if CMD_BOOTI + select LZ4 + help + Support decompressing an LZ4 image from memory region. + config CMD_UNZIP bool "unzip" default y if CMD_BOOTI + select GZIP help Uncompress a zip-compressed memory region. config CMD_ZIP bool "zip" + select GZIP_COMPRESSED help Compress a memory region with zlib deflate method. @@ -1047,26 +1097,46 @@ config CMD_LOADS help Load an S-Record file over serial line +config CMD_LSBLK + depends on BLK + bool "lsblk - list block drivers and devices" + help + Print list of available block device drivers, and for each, the list + of known block devices. + config CMD_MMC bool "mmc" help MMC memory mapped support. +if CMD_MMC + +config CMD_BKOPS_ENABLE + bool "mmc bkops enable" + depends on CMD_MMC + default n + help + Enable command for setting manual background operations handshake + on a eMMC device. The feature is optionally available on eMMC devices + conforming to standard >= 4.41. + config CMD_MMC_RPMB bool "Enable support for RPMB in the mmc command" - depends on CMD_MMC + depends on SUPPORT_EMMC_RPMB help Enable the commands for reading, writing and programming the key for the Replay Protection Memory Block partition in eMMC. config CMD_MMC_SWRITE bool "mmc swrite" - depends on CMD_MMC && MMC_WRITE + depends on MMC_WRITE select IMAGE_SPARSE help Enable support for the "mmc swrite" command to write Android sparse images to eMMC. +endif + config CMD_MTD bool "mtd" depends on MTD @@ -1599,15 +1669,6 @@ config CMD_BSP option provides a way to control this. The commands that are enabled vary depending on the board. -config CMD_BKOPS_ENABLE - bool "mmc bkops enable" - depends on CMD_MMC - default n - help - Enable command for setting manual background operations handshake - on a eMMC device. The feature is optionally available on eMMC devices - conforming to standard >= 4.41. - config CMD_BLOCK_CACHE bool "blkcache - control and stats for block cache" depends on BLOCK_CACHE @@ -1673,6 +1734,12 @@ config CMD_DATE Enable the 'date' command for getting/setting the time/date in RTC devices. +config CMD_RTC + bool "rtc" + depends on DM_RTC + help + Enable the 'rtc' command for low-level access to RTC devices. + config CMD_TIME bool "time" help @@ -2095,7 +2162,7 @@ config CMD_BEDBUG help The bedbug (emBEDded deBUGger) command provides debugging features for some PowerPC processors. For details please see the - docuemntation in doc/README.beddbug + documentation in doc/README.bedbug. config CMD_DIAG bool "diag - Board diagnostics" @@ -2172,6 +2239,14 @@ config CMD_UBI It is also strongly encouraged to also enable CONFIG_MTD to get full partition support. +config CMD_UBI_RENAME + bool "Enable rename" + depends on CMD_UBI + default n + help + Enable a "ubi" command to rename ubi volume: + ubi rename + config CMD_UBIFS tristate "Enable UBIFS - Unsorted block images filesystem commands" depends on CMD_UBI