X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=cmd%2FKconfig;h=d440675b6e38a8285ac5982247e2436fa0a8d251;hb=e89f8aae3d67cd3d2d04cedd9735c5e5fd32b621;hp=42d955c96aee9520bd68462b09ed01ff47b03f82;hpb=390194d43fa4478ddb638164ddb114c979f3e57a;p=platform%2Fkernel%2Fu-boot.git diff --git a/cmd/Kconfig b/cmd/Kconfig index 42d955c..d440675 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -23,6 +23,29 @@ config HUSH_PARSER If disabled, you get the old, much simpler behaviour with a somewhat smaller memory footprint. +config CMDLINE_EDITING + bool "Enable command line editing" + depends on CMDLINE + default y + help + Enable editing and History functions for interactive command line + input operations + +config AUTO_COMPLETE + bool "Enable auto complete using TAB" + depends on CMDLINE + default y + help + Enable auto completion of commands using TAB. + +config SYS_LONGHELP + bool "Enable long help messages" + depends on CMDLINE + default y if CMDLINE + help + Defined when you want long help messages included + Do not set this option when short of memory. + config SYS_PROMPT string "Shell prompt" default "=> " @@ -116,6 +139,9 @@ endmenu source "cmd/fastboot/Kconfig" +config BUILD_BIN2C + bool + comment "Commands" menu "Info commands" @@ -222,6 +248,8 @@ config CMD_BOOTEFI_HELLO for testing that EFI is working at a basic level, and for bringing up EFI support on a new architecture. +source lib/efi_selftest/Kconfig + config CMD_BOOTMENU bool "bootmenu" select MENU @@ -261,7 +289,6 @@ config CMD_IMI config CMD_IMLS bool "imls" - default y help List all images found in flash @@ -304,6 +331,12 @@ config CMD_SPL_WRITE_SIZE flash used by Falcon-mode boot. See the documentation until CMD_SPL for detail. +config CMD_FITUPD + bool "fitImage update command" + help + Implements the 'fitupd' command, which allows to automatically + store software updates present on a TFTP server in NOR Flash + config CMD_THOR_DOWNLOAD bool "thor - TIZEN 'thor' download" help @@ -390,6 +423,12 @@ endmenu menu "Memory commands" +config CMD_BINOP + bool "binop" + help + Compute binary operations (xor, or, and) of byte arrays of arbitrary + size from memory and store the result in memory or the environment. + config CMD_CRC32 bool "crc32" select HASH @@ -494,6 +533,15 @@ config CMD_MEMTEST help Simple RAM read/write test. +if CMD_MEMTEST + +config SYS_ALT_MEMTEST + bool "Alternative test" + help + Use a more complete alternative memory test. + +endif + config CMD_MX_CYCLIC bool "mdc, mwc" help @@ -526,6 +574,7 @@ menu "Compression commands" config CMD_LZMADEC bool "lzmadec" + default y if CMD_BOOTI select LZMA help Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm) @@ -533,6 +582,7 @@ config CMD_LZMADEC config CMD_UNZIP bool "unzip" + default y if CMD_BOOTI help Uncompress a zip-compressed memory region. @@ -574,7 +624,7 @@ config CMD_DEMO config CMD_DFU bool "dfu" - select USB_FUNCTION_DFU + select DFU help Enables the command "dfu" which is used to have U-Boot create a DFU class device via USB. This command requires that the "dfu_alt_info" @@ -608,6 +658,7 @@ config CMD_FLASH config CMD_FPGA bool "fpga" + depends on FPGA default y help FPGA support. @@ -663,10 +714,19 @@ config CMD_GPT bool "GPT (GUID Partition Table) command" select PARTITION_UUIDS select EFI_PARTITION + select HAVE_BLOCK_DEVICE + imply RANDOM_UUID help Enable the 'gpt' command to ready and write GPT style partition tables. +config RANDOM_UUID + bool "GPT Random UUID generation" + select LIB_UUID + help + Enable the generation of partitions with random UUIDs if none + are provided. + config CMD_GPT_RENAME bool "GPT partition renaming commands" depends on CMD_GPT @@ -800,6 +860,7 @@ config CMD_ONENAND config CMD_PART bool "part" select PARTITION_UUIDS + select HAVE_BLOCK_DEVICE help Read and display information about the partition table on various media. @@ -850,6 +911,15 @@ config CMD_SAVES Provides a way to save a binary file using the Motorola S-Record format over the serial line. +config CMD_SCSI + bool "scsi - Access to SCSI devices" + default y if SCSI + help + This provides a 'scsi' command which provides access to SCSI (Small + Computer System Interface) devices. The command provides a way to + scan the bus, reset the bus, read and write data and get information + about devices. + config CMD_SDRAM bool "sdram - Print SDRAM configuration information" help @@ -892,11 +962,28 @@ config CMD_UNIVERSE config CMD_USB bool "usb" + select HAVE_BLOCK_DEVICE help USB support. +config CMD_USB_SDP + bool "sdp" + select USB_FUNCTION_SDP + help + Enables the command "sdp" which is used to have U-Boot emulating the + Serial Download Protocol (SDP) via USB. +config CMD_ROCKUSB + bool "rockusb" + depends on USB_FUNCTION_ROCKUSB + help + Rockusb protocol is widely used by Rockchip SoC based devices. It can + read/write info, image to/from devices. This enable rockusb command + support to communication with rockusb device. for more detail about + this command, please read doc/README.rockusb. + config CMD_USB_MASS_STORAGE bool "UMS usb mass storage" + select USB_FUNCTION_MASS_STORAGE help USB mass storage support @@ -936,9 +1023,10 @@ endmenu menu "Network commands" +if NET + config CMD_NET bool "bootp, tftpboot" - select NET default y help Network commands. @@ -962,11 +1050,13 @@ config CMD_RARP config CMD_DHCP bool "dhcp" + depends on CMD_NET help Boot image via network using DHCP/TFTP protocol config CMD_PXE bool "pxe" + depends on CMD_NET select MENU help Boot image via network using PXE protocol @@ -1015,6 +1105,8 @@ config CMD_ETHSW operations such as enabling / disabling a port and viewing/maintaining the filtering database (FDB) +endif + endmenu menu "Misc commands" @@ -1145,6 +1237,7 @@ config CMD_TERMINAL config CMD_UUID bool "uuid, guid - generation of unique IDs" + select LIB_UUID help This enables two commands: @@ -1156,6 +1249,8 @@ config CMD_UUID endmenu +source "cmd/ti/Kconfig" + config CMD_BOOTSTAGE bool "Enable the 'bootstage' command" depends on BOOTSTAGE @@ -1304,6 +1399,16 @@ config CMD_CROS_EC endmenu menu "Filesystem commands" +config CMD_BTRFS + bool "Enable the 'btrsubvol' command" + select FS_BTRFS + help + This enables the 'btrsubvol' command to list subvolumes + of a BTRFS filesystem. There are no special commands for + listing BTRFS directories or loading BTRFS files - this + can be done by the generic 'fs' commands (see CMD_FS_GENERIC) + when BTRFS is enabled (see FS_BTRFS). + config CMD_CBFS bool "Enable the 'cbfs' command" depends on FS_CBFS @@ -1327,17 +1432,20 @@ config CMD_CRAMFS config CMD_EXT2 bool "ext2 command support" + select FS_EXT4 help Enables EXT2 FS command config CMD_EXT4 bool "ext4 command support" + select FS_EXT4 help Enables EXT4 FS command config CMD_EXT4_WRITE depends on CMD_EXT4 bool "ext4 write command support" + select EXT4_WRITE help Enables EXT4 FS write command @@ -1374,13 +1482,14 @@ config CMD_MTDPARTS config MTDIDS_DEFAULT string "Default MTD IDs" - depends on CMD_MTDPARTS + depends on CMD_MTDPARTS || CMD_NAND || CMD_FLASH help - Defines a default MTD ID + Defines a default MTD IDs list for use with MTD partitions in the + Linux MTD command line partitions format. config MTDPARTS_DEFAULT string "Default MTD partition scheme" - depends on CMD_MTDPARTS + depends on CMD_MTDPARTS || CMD_NAND || CMD_FLASH help Defines a default MTD partitioning scheme in the Linux MTD command line partitions format @@ -1404,15 +1513,6 @@ config CMD_REISER reiserls - list files reiserload - load a file -config CMD_SCSI - bool "scsi - Access to SCSI devices" - default y if SCSI - help - This provides a 'scsi' command which provides access to SCSI (Small - Computer System Interface) devices. The command provides a way to - scan the bus, reset the bus, read and write data and get information - about devices. - config CMD_YAFFS2 bool "yaffs2 - Access of YAFFS2 filesystem" depends on YAFFS2 @@ -1471,6 +1571,14 @@ config CMD_KGDB single-stepping, inspecting variables, etc. This is supported only on PowerPC at present. +config CMD_LOG + bool "log - Generation, control and access to logging" + help + This provides access to logging features. It allows the output of + log data to be controlled to a limited extent (setting up the default + maximum log level for emitting of records). It also provides access + to a command used for testing the log system. + config CMD_TRACE bool "trace - Support tracing of function calls and timing" help