X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=cmd%2FKconfig;h=676011dcdc4c258d6eced7869c7176f3264bcd88;hb=748277c415ff5bd74d6913928cab2a3da6a0b69f;hp=845589d2ffc2b7b39afac592f51c011a8bffd6bd;hpb=3a91a253768a76c734a57dffcbe6ce730b4d2e56;p=platform%2Fkernel%2Fu-boot.git diff --git a/cmd/Kconfig b/cmd/Kconfig index 845589d..676011d 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -116,6 +116,9 @@ endmenu source "cmd/fastboot/Kconfig" +config BUILD_BIN2C + bool + comment "Commands" menu "Info commands" @@ -222,6 +225,8 @@ config CMD_BOOTEFI_HELLO for testing that EFI is working at a basic level, and for bringing up EFI support on a new architecture. +source lib/efi_selftest/Kconfig + config CMD_BOOTMENU bool "bootmenu" select MENU @@ -261,7 +266,6 @@ config CMD_IMI config CMD_IMLS bool "imls" - default y help List all images found in flash @@ -304,6 +308,26 @@ config CMD_SPL_WRITE_SIZE flash used by Falcon-mode boot. See the documentation until CMD_SPL for detail. +config CMD_THOR_DOWNLOAD + bool "thor - TIZEN 'thor' download" + help + Implements the 'thor' download protocol. This is a way of + downloading a software update over USB from an attached host. + There is no documentation about this within the U-Boot source code + but you should be able to find something on the interwebs. + +config CMD_ZBOOT + bool "zboot - x86 boot command" + help + With x86 machines it is common to boot a bzImage file which + contains both a kernel and a setup.bin file. The latter includes + configuration information from the dark ages which x86 boards still + need to pick things out of. + + Consider using FIT in preference to this since it supports directly + booting both 32- and 64-bit kernels, as well as secure boot. + Documentation is available in doc/uImage.FIT/x86-fit-boot.txt + endmenu menu "Environment commands" @@ -370,23 +394,10 @@ endmenu menu "Memory commands" -config CMD_MEMORY - bool "md, mm, nm, mw, cp, cmp, base, loop" - default y - help - Memory commands. - md - memory display - mm - memory modify (auto-incrementing address) - nm - memory modify (constant address) - mw - memory write (fill) - cp - memory copy - cmp - memory compare - base - print or set address offset - loop - initialize loop on address range - config CMD_CRC32 bool "crc32" select HASH + default n if ARCH_SUNXI default y help Compute CRC32. @@ -445,6 +456,11 @@ config EEPROM_LAYOUT_HELP_STRING Help printed with the LAYOUT VERSIONS part of the 'eeprom' command's help. +config LOOPW + bool "loopw" + help + Infinite write loop on address range + config CMD_MD5SUM bool "md5sum" default n @@ -459,22 +475,24 @@ config MD5SUM_VERIFY help Add -v option to verify data against an MD5 checksum. -config CMD_SHA1SUM - bool "sha1sum" - select SHA1 - help - Compute SHA1 checksum. - -config SHA1SUM_VERIFY - bool "sha1sum -v" - depends on CMD_SHA1SUM +config CMD_MEMINFO + bool "meminfo" help - Add -v option to verify data against a SHA1 checksum. + Display memory information. -config LOOPW - bool "loopw" +config CMD_MEMORY + bool "md, mm, nm, mw, cp, cmp, base, loop" + default y help - Infinite write loop on address range + Memory commands. + md - memory display + mm - memory modify (auto-incrementing address) + nm - memory modify (constant address) + mw - memory write (fill) + cp - memory copy + cmp - memory compare + base - print or set address offset + loop - initialize loop on address range config CMD_MEMTEST bool "memtest" @@ -487,10 +505,25 @@ config CMD_MX_CYCLIC mdc - memory display cyclic mwc - memory write cyclic -config CMD_MEMINFO - bool "meminfo" +config CMD_SHA1SUM + bool "sha1sum" + select SHA1 help - Display memory information. + Compute SHA1 checksum. + +config SHA1SUM_VERIFY + bool "sha1sum -v" + depends on CMD_SHA1SUM + help + Add -v option to verify data against a SHA1 checksum. + +config CMD_STRINGS + bool "strings - display strings in memory" + help + This works similarly to the Unix 'strings' command except that it + works with a memory range. String of printable characters found + within the range are displayed. The minimum number of characters + for a sequence to be considered a string can be provided. endmenu @@ -498,6 +531,7 @@ menu "Compression commands" config CMD_LZMADEC bool "lzmadec" + default y if CMD_BOOTI select LZMA help Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm) @@ -505,6 +539,8 @@ config CMD_LZMADEC config CMD_UNZIP bool "unzip" + default n if ARCH_SUNXI + default y if CMD_BOOTI help Uncompress a zip-compressed memory region. @@ -549,7 +585,9 @@ config CMD_DFU select USB_FUNCTION_DFU help Enables the command "dfu" which is used to have U-Boot create a DFU - class device via USB. + class device via USB. This command requires that the "dfu_alt_info" + environment variable be set and define the alt settings to expose to + the host. config CMD_DM bool "dm - Access to driver model information" @@ -633,10 +671,17 @@ config CMD_GPT bool "GPT (GUID Partition Table) command" select PARTITION_UUIDS select EFI_PARTITION + imply RANDOM_UUID help Enable the 'gpt' command to ready and write GPT style partition tables. +config RANDOM_UUID + bool "GPT Random UUID generation" + help + Enable the generation of partitions with random UUIDs if none + are provided. + config CMD_GPT_RENAME bool "GPT partition renaming commands" depends on CMD_GPT @@ -703,12 +748,14 @@ config CMD_I2C config CMD_LOADB bool "loadb" + default n if ARCH_SUNXI default y help Load a binary file over serial line. config CMD_LOADS bool "loads" + default n if ARCH_SUNXI default y help Load an S-Record file over serial line @@ -743,6 +790,13 @@ config CMD_NAND_TORTURE endif # CMD_NAND +config CMD_NVME + bool "nvme" + depends on NVME + default y if NVME + help + NVM Express device support + config CMD_MMC_SPI bool "mmc_spi - Set up MMC SPI device" help @@ -841,11 +895,38 @@ config CMD_SPI help SPI utility command. +config CMD_TSI148 + bool "tsi148 - Command to access tsi148 device" + help + This provides various sub-commands to initialise and configure the + Turndra tsi148 device. See the command help for full details. + +config CMD_UNIVERSE + bool "universe - Command to set up the Turndra Universe controller" + help + This allows setting up the VMEbus provided by this controller. + See the command help for full details. + config CMD_USB bool "usb" help USB support. +config CMD_USB_SDP + bool "sdp" + select USB_FUNCTION_SDP + help + Enables the command "sdp" which is used to have U-Boot emulating the + Serial Download Protocol (SDP) via USB. +config CMD_ROCKUSB + bool "rockusb" + depends on USB_FUNCTION_ROCKUSB + help + Rockusb protocol is widely used by Rockchip SoC based devices. It can + read/write info, image to/from devices. This enable rockusb command + support to communication with rockusb device. for more detail about + this command, please read doc/README.rockusb. + config CMD_USB_MASS_STORAGE bool "UMS usb mass storage" help @@ -1057,6 +1138,7 @@ config CMD_GETTIME # TODO: rename to CMD_SLEEP config CMD_MISC bool "sleep" + default n if ARCH_SUNXI default y help Delay execution for some time @@ -1086,8 +1168,29 @@ config CMD_QFW source "cmd/mvebu/Kconfig" +config CMD_TERMINAL + bool "terminal - provides a way to attach a serial terminal" + help + Provides a 'cu'-like serial terminal command. This can be used to + access other serial ports from the system console. The terminal + is very simple with no special processing of characters. As with + cu, you can press ~. (tilde followed by period) to exit. + +config CMD_UUID + bool "uuid, guid - generation of unique IDs" + help + This enables two commands: + + uuid - generate random Universally Unique Identifier + guid - generate Globally Unique Identifier based on random UUID + + The two commands are very similar except for the endianness of the + output. + endmenu +source "cmd/ti/Kconfig" + config CMD_BOOTSTAGE bool "Enable the 'bootstage' command" depends on BOOTSTAGE @@ -1236,6 +1339,16 @@ config CMD_CROS_EC endmenu menu "Filesystem commands" +config CMD_BTRFS + bool "Enable the 'btrsubvol' command" + select FS_BTRFS + help + This enables the 'btrsubvol' command to list subvolumes + of a BTRFS filesystem. There are no special commands for + listing BTRFS directories or loading BTRFS files - this + can be done by the generic 'fs' commands (see CMD_FS_GENERIC) + when BTRFS is enabled (see FS_BTRFS). + config CMD_CBFS bool "Enable the 'cbfs' command" depends on FS_CBFS @@ -1259,17 +1372,20 @@ config CMD_CRAMFS config CMD_EXT2 bool "ext2 command support" + select FS_EXT4 help Enables EXT2 FS command config CMD_EXT4 bool "ext4 command support" + select FS_EXT4 help Enables EXT4 FS command config CMD_EXT4_WRITE depends on CMD_EXT4 bool "ext4 write command support" + select EXT4_WRITE help Enables EXT4 FS write command @@ -1306,13 +1422,14 @@ config CMD_MTDPARTS config MTDIDS_DEFAULT string "Default MTD IDs" - depends on CMD_MTDPARTS + depends on CMD_MTDPARTS || CMD_NAND || CMD_FLASH help - Defines a default MTD ID + Defines a default MTD IDs list for use with MTD partitions in the + Linux MTD command line partitions format. config MTDPARTS_DEFAULT string "Default MTD partition scheme" - depends on CMD_MTDPARTS + depends on CMD_MTDPARTS || CMD_NAND || CMD_FLASH help Defines a default MTD partitioning scheme in the Linux MTD command line partitions format @@ -1345,6 +1462,28 @@ config CMD_SCSI scan the bus, reset the bus, read and write data and get information about devices. +config CMD_YAFFS2 + bool "yaffs2 - Access of YAFFS2 filesystem" + depends on YAFFS2 + default y + help + This provides commands for accessing a YAFFS2 filesystem. Yet + Another Flash Filesystem 2 is a filesystem designed specifically + for NAND flash. It incorporates bad-block management and ensures + that device writes are sequential regardless of filesystem + activity. + +config CMD_ZFS + bool "zfs - Access of ZFS filesystem" + help + This provides commands to accessing a ZFS filesystem, commonly used + on Solaris systems. Two sub-commands are provided: + + zfsls - list files in a directory + zfsload - load a file + + See doc/README.zfs for more details. + endmenu menu "Debug commands" @@ -1381,6 +1520,23 @@ config CMD_KGDB single-stepping, inspecting variables, etc. This is supported only on PowerPC at present. +config CMD_LOG + bool "log - Generation, control and access to logging" + help + This provides access to logging features. It allows the output of + log data to be controlled to a limited extent (setting up the default + maximum log level for emitting of records). It also provides access + to a command used for testing the log system. + +config CMD_TRACE + bool "trace - Support tracing of function calls and timing" + help + Enables a command to control using of function tracing within + U-Boot. This allows recording of call traces including timing + information. The command can write data to memory for exporting + for analsys (e.g. using bootchart). See doc/README.trace for full + details. + endmenu config CMD_UBI