X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Fxes%2Fxpedite517x%2Fddr.c;h=f48c02fdae9bc9c188edcb718f643bbfa42400bc;hb=3765b3e7bd0f8e46914d417f29cbcb0c72b1acf7;hp=1d57d0909a6caf1b9fc4c680f2b75f1ab06e70b5;hpb=d963e84c92a63b4e6c4f2f80482a5ecbe9b24fe0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/xes/xpedite517x/ddr.c b/board/xes/xpedite517x/ddr.c
index 1d57d09..f48c02f 100644
--- a/board/xes/xpedite517x/ddr.c
+++ b/board/xes/xpedite517x/ddr.c
@@ -2,23 +2,7 @@
  * Copyright 2009 Extreme Engineering Solutions, Inc.
  * Copyright 2007-2008 Freescale Semiconductor, Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
@@ -26,40 +10,12 @@
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/fsl_ddr_dimm_params.h>
 
-static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address)
 {
 	i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
 		sizeof(ddr2_spd_eeprom_t));
 }
 
-unsigned int fsl_ddr_get_mem_data_rate(void)
-{
-	return get_bus_freq(0);
-}
-
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
-			unsigned int ctrl_num)
-{
-	unsigned int i;
-	unsigned int i2c_address = 0;
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (ctrl_num == 0) {
-			i2c_address = SPD_EEPROM_ADDRESS1;
-#ifdef SPD_EEPROM_ADDRESS2
-		} else if (ctrl_num == 1) {
-			i2c_address = SPD_EEPROM_ADDRESS2;
-#endif
-		} else {
-			/* An inalid ctrl number was give, use default SPD */
-			printf("ERROR: invalid DDR ctrl: %d\n", ctrl_num);
-			i2c_address = SPD_EEPROM_ADDRESS1;
-		}
-
-		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
-	}
-}
-
 /*
  * There are four board-specific SDRAM timing parameters which must be
  * calculated based on the particular PCB artwork.  These are:
@@ -144,7 +100,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	unsigned int datarate;
 
 	get_sys_info(&sysinfo);
-	datarate = fsl_ddr_get_mem_data_rate() / 1000000;
+	datarate = get_ddr_freq(0) / 1000000;
 
 	for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) {
 		if ((bopts[i].datarate_mhz_low <= datarate) &&