X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Fti%2Fam335x%2Fmux.c;h=8437ef515afed9dc4fa27162f2a1407400ed0fd2;hb=6acc7c3cbc05873d62118640cf964e9c9665804c;hp=82bb9fd3bac2c21e5028453402226eb3dd1a9c41;hpb=e363426e999b786ee4791f49d90ae84a3210f7b8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 82bb9fd..8437ef5 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -16,247 +16,44 @@
 #include <common.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
 #include <asm/io.h>
 #include <i2c.h>
 #include "board.h"
 
-#define MUX_CFG(value, offset)	\
-	__raw_writel(value, (CTRL_BASE + offset));
+static struct module_pin_mux uart0_pin_mux[] = {
+	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
+	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},		/* UART0_TXD */
+	{-1},
+};
 
-/* PAD Control Fields */
-#define SLEWCTRL	(0x1 << 6)
-#define RXACTIVE	(0x1 << 5)
-#define PULLUP_EN	(0x1 << 4) /* Pull UP Selection */
-#define PULLUDEN	(0x0 << 3) /* Pull up enabled */
-#define PULLUDDIS	(0x1 << 3) /* Pull up disabled */
-#define MODE(val)	val	/* used for Readability */
+static struct module_pin_mux uart1_pin_mux[] = {
+	{OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART1_RXD */
+	{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},		/* UART1_TXD */
+	{-1},
+};
 
-/*
- * PAD CONTROL OFFSETS
- * Field names corresponds to the pad signal name
- */
-struct pad_signals {
-	int gpmc_ad0;
-	int gpmc_ad1;
-	int gpmc_ad2;
-	int gpmc_ad3;
-	int gpmc_ad4;
-	int gpmc_ad5;
-	int gpmc_ad6;
-	int gpmc_ad7;
-	int gpmc_ad8;
-	int gpmc_ad9;
-	int gpmc_ad10;
-	int gpmc_ad11;
-	int gpmc_ad12;
-	int gpmc_ad13;
-	int gpmc_ad14;
-	int gpmc_ad15;
-	int gpmc_a0;
-	int gpmc_a1;
-	int gpmc_a2;
-	int gpmc_a3;
-	int gpmc_a4;
-	int gpmc_a5;
-	int gpmc_a6;
-	int gpmc_a7;
-	int gpmc_a8;
-	int gpmc_a9;
-	int gpmc_a10;
-	int gpmc_a11;
-	int gpmc_wait0;
-	int gpmc_wpn;
-	int gpmc_be1n;
-	int gpmc_csn0;
-	int gpmc_csn1;
-	int gpmc_csn2;
-	int gpmc_csn3;
-	int gpmc_clk;
-	int gpmc_advn_ale;
-	int gpmc_oen_ren;
-	int gpmc_wen;
-	int gpmc_be0n_cle;
-	int lcd_data0;
-	int lcd_data1;
-	int lcd_data2;
-	int lcd_data3;
-	int lcd_data4;
-	int lcd_data5;
-	int lcd_data6;
-	int lcd_data7;
-	int lcd_data8;
-	int lcd_data9;
-	int lcd_data10;
-	int lcd_data11;
-	int lcd_data12;
-	int lcd_data13;
-	int lcd_data14;
-	int lcd_data15;
-	int lcd_vsync;
-	int lcd_hsync;
-	int lcd_pclk;
-	int lcd_ac_bias_en;
-	int mmc0_dat3;
-	int mmc0_dat2;
-	int mmc0_dat1;
-	int mmc0_dat0;
-	int mmc0_clk;
-	int mmc0_cmd;
-	int mii1_col;
-	int mii1_crs;
-	int mii1_rxerr;
-	int mii1_txen;
-	int mii1_rxdv;
-	int mii1_txd3;
-	int mii1_txd2;
-	int mii1_txd1;
-	int mii1_txd0;
-	int mii1_txclk;
-	int mii1_rxclk;
-	int mii1_rxd3;
-	int mii1_rxd2;
-	int mii1_rxd1;
-	int mii1_rxd0;
-	int rmii1_refclk;
-	int mdio_data;
-	int mdio_clk;
-	int spi0_sclk;
-	int spi0_d0;
-	int spi0_d1;
-	int spi0_cs0;
-	int spi0_cs1;
-	int ecap0_in_pwm0_out;
-	int uart0_ctsn;
-	int uart0_rtsn;
-	int uart0_rxd;
-	int uart0_txd;
-	int uart1_ctsn;
-	int uart1_rtsn;
-	int uart1_rxd;
-	int uart1_txd;
-	int i2c0_sda;
-	int i2c0_scl;
-	int mcasp0_aclkx;
-	int mcasp0_fsx;
-	int mcasp0_axr0;
-	int mcasp0_ahclkr;
-	int mcasp0_aclkr;
-	int mcasp0_fsr;
-	int mcasp0_axr1;
-	int mcasp0_ahclkx;
-	int xdma_event_intr0;
-	int xdma_event_intr1;
-	int nresetin_out;
-	int porz;
-	int nnmi;
-	int osc0_in;
-	int osc0_out;
-	int rsvd1;
-	int tms;
-	int tdi;
-	int tdo;
-	int tck;
-	int ntrst;
-	int emu0;
-	int emu1;
-	int osc1_in;
-	int osc1_out;
-	int pmic_power_en;
-	int rtc_porz;
-	int rsvd2;
-	int ext_wakeup;
-	int enz_kaldo_1p8v;
-	int usb0_dm;
-	int usb0_dp;
-	int usb0_ce;
-	int usb0_id;
-	int usb0_vbus;
-	int usb0_drvvbus;
-	int usb1_dm;
-	int usb1_dp;
-	int usb1_ce;
-	int usb1_id;
-	int usb1_vbus;
-	int usb1_drvvbus;
-	int ddr_resetn;
-	int ddr_csn0;
-	int ddr_cke;
-	int ddr_ck;
-	int ddr_nck;
-	int ddr_casn;
-	int ddr_rasn;
-	int ddr_wen;
-	int ddr_ba0;
-	int ddr_ba1;
-	int ddr_ba2;
-	int ddr_a0;
-	int ddr_a1;
-	int ddr_a2;
-	int ddr_a3;
-	int ddr_a4;
-	int ddr_a5;
-	int ddr_a6;
-	int ddr_a7;
-	int ddr_a8;
-	int ddr_a9;
-	int ddr_a10;
-	int ddr_a11;
-	int ddr_a12;
-	int ddr_a13;
-	int ddr_a14;
-	int ddr_a15;
-	int ddr_odt;
-	int ddr_d0;
-	int ddr_d1;
-	int ddr_d2;
-	int ddr_d3;
-	int ddr_d4;
-	int ddr_d5;
-	int ddr_d6;
-	int ddr_d7;
-	int ddr_d8;
-	int ddr_d9;
-	int ddr_d10;
-	int ddr_d11;
-	int ddr_d12;
-	int ddr_d13;
-	int ddr_d14;
-	int ddr_d15;
-	int ddr_dqm0;
-	int ddr_dqm1;
-	int ddr_dqs0;
-	int ddr_dqsn0;
-	int ddr_dqs1;
-	int ddr_dqsn1;
-	int ddr_vref;
-	int ddr_vtp;
-	int ddr_strben0;
-	int ddr_strben1;
-	int ain7;
-	int ain6;
-	int ain5;
-	int ain4;
-	int ain3;
-	int ain2;
-	int ain1;
-	int ain0;
-	int vrefp;
-	int vrefn;
+static struct module_pin_mux uart2_pin_mux[] = {
+	{OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)},	/* UART2_RXD */
+	{OFFSET(spi0_d0), (MODE(1) | PULLUDEN)},		/* UART2_TXD */
+	{-1},
 };
 
-struct module_pin_mux {
-	short reg_offset;
-	unsigned char val;
+static struct module_pin_mux uart3_pin_mux[] = {
+	{OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)},	/* UART3_RXD */
+	{OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)},	/* UART3_TXD */
+	{-1},
 };
 
-/* Pad control register offset */
-#define PAD_CTRL_BASE	0x800
-#define OFFSET(x)	(unsigned int) (&((struct pad_signals *) \
-				(PAD_CTRL_BASE))->x)
+static struct module_pin_mux uart4_pin_mux[] = {
+	{OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)},	/* UART4_RXD */
+	{OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)},		/* UART4_TXD */
+	{-1},
+};
 
-static struct module_pin_mux uart0_pin_mux[] = {
-	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
-	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},		/* UART0_TXD */
+static struct module_pin_mux uart5_pin_mux[] = {
+	{OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)},	/* UART5_RXD */
+	{OFFSET(lcd_data8), (MODE(4) | PULLUDEN)},		/* UART5_TXD */
 	{-1},
 };
 
@@ -272,6 +69,17 @@ static struct module_pin_mux mmc0_pin_mux[] = {
 	{-1},
 };
 
+static struct module_pin_mux mmc0_no_cd_pin_mux[] = {
+	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
+	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
+	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT1 */
+	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT0 */
+	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
+	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
+	{OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)},		/* MMC0_WP */
+	{-1},
+};
+
 static struct module_pin_mux mmc0_pin_mux_sk_evm[] = {
 	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
 	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
@@ -363,25 +171,35 @@ static struct module_pin_mux mii1_pin_mux[] = {
 	{-1},
 };
 
-/*
- * Configure the pin mux for the module
- */
-static void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux)
+void enable_uart0_pin_mux(void)
 {
-	int i;
+	configure_module_pin_mux(uart0_pin_mux);
+}
 
-	if (!mod_pin_mux)
-		return;
+void enable_uart1_pin_mux(void)
+{
+	configure_module_pin_mux(uart1_pin_mux);
+}
 
-	for (i = 0; mod_pin_mux[i].reg_offset != -1; i++)
-		MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset);
+void enable_uart2_pin_mux(void)
+{
+	configure_module_pin_mux(uart2_pin_mux);
 }
 
-void enable_uart0_pin_mux(void)
+void enable_uart3_pin_mux(void)
 {
-	configure_module_pin_mux(uart0_pin_mux);
+	configure_module_pin_mux(uart3_pin_mux);
+}
+
+void enable_uart4_pin_mux(void)
+{
+	configure_module_pin_mux(uart4_pin_mux);
 }
 
+void enable_uart5_pin_mux(void)
+{
+	configure_module_pin_mux(uart5_pin_mux);
+}
 
 void enable_i2c0_pin_mux(void)
 {
@@ -443,12 +261,27 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header)
 			configure_module_pin_mux(mmc1_pin_mux);
 			configure_module_pin_mux(spi0_pin_mux);
 		}
+	} else if (!strncmp(header->config, "SKU#02", 6)) {
+		/*
+		 * Industrial Motor Control (IDK)
+		 * note: IDK console is on UART3 by default.
+		 *       So u-boot mus be build with CONFIG_SERIAL4 and
+		 *       CONFIG_CONS_INDEX=4
+		 */
+		configure_module_pin_mux(mii1_pin_mux);
+		configure_module_pin_mux(mmc0_no_cd_pin_mux);
 	} else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) {
 		/* Starter Kit EVM */
 		configure_module_pin_mux(i2c1_pin_mux);
 		configure_module_pin_mux(gpio0_7_pin_mux);
 		configure_module_pin_mux(rgmii1_pin_mux);
 		configure_module_pin_mux(mmc0_pin_mux_sk_evm);
+	} else if (!strncmp(header->name, "A335BNLT", HDR_NAME_LEN)) {
+		/* Beaglebone LT pinmux */
+		configure_module_pin_mux(i2c1_pin_mux);
+		configure_module_pin_mux(mii1_pin_mux);
+		configure_module_pin_mux(mmc0_pin_mux);
+		configure_module_pin_mux(mmc1_pin_mux);
 	} else {
 		puts("Unknown board, cannot configure pinmux.");
 		hang();