X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Fti%2Fam335x%2Fboard.c;h=ed4229e258d24e58584b059abbf720625ebffbc8;hb=79f38777947ac7685e2cef8bd977f954ab198c0e;hp=5d279ecdbc1952452c93256f86a88f3e76358e49;hpb=c68436fa427a69ea308d74c410067507d6c7103b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 5d279ec..ed4229e 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -44,7 +44,7 @@ static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
 
 /* MII mode defines */
 #define MII_MODE_ENABLE		0x0
-#define RGMII_MODE_ENABLE	0xA
+#define RGMII_MODE_ENABLE	0x3A
 
 /* GPIO that controls power to DDR on EVM-SK */
 #define GPIO_DDR_VTT_EN		7
@@ -68,6 +68,11 @@ static inline int board_is_evm_sk(void)
 	return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
 }
 
+static inline int board_is_idk(void)
+{
+	return !strncmp(header.config, "SKU#02", 6);
+}
+
 /*
  * Read header information from EEPROM into global structure.
  */
@@ -242,7 +247,24 @@ void s_init(void)
 	/* UART softreset */
 	u32 regVal;
 
+#ifdef CONFIG_SERIAL1
 	enable_uart0_pin_mux();
+#endif /* CONFIG_SERIAL1 */
+#ifdef CONFIG_SERIAL2
+	enable_uart1_pin_mux();
+#endif /* CONFIG_SERIAL2 */
+#ifdef CONFIG_SERIAL3
+	enable_uart2_pin_mux();
+#endif /* CONFIG_SERIAL3 */
+#ifdef CONFIG_SERIAL4
+	enable_uart3_pin_mux();
+#endif /* CONFIG_SERIAL4 */
+#ifdef CONFIG_SERIAL5
+	enable_uart4_pin_mux();
+#endif /* CONFIG_SERIAL5 */
+#ifdef CONFIG_SERIAL6
+	enable_uart5_pin_mux();
+#endif /* CONFIG_SERIAL6 */
 
 	regVal = readl(&uart_base->uartsyscfg);
 	regVal |= UART_RESET;
@@ -296,9 +318,31 @@ int board_init(void)
 
 	gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
 
+	gpmc_init();
+
 	return 0;
 }
 
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	char safe_string[HDR_NAME_LEN + 1];
+
+	/* Now set variables based on the header. */
+	strncpy(safe_string, (char *)header.name, sizeof(header.name));
+	safe_string[sizeof(header.name)] = 0;
+	setenv("board_name", safe_string);
+
+	strncpy(safe_string, (char *)header.version, sizeof(header.version));
+	safe_string[sizeof(header.version)] = 0;
+	setenv("board_rev", safe_string);
+#endif
+
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_DRIVER_TI_CPSW
 static void cpsw_control(int enabled)
 {
@@ -337,9 +381,14 @@ static struct cpsw_platform_data cpsw_data = {
 	.host_port_num		= 0,
 	.version		= CPSW_CTRL_VERSION_2,
 };
+#endif
 
+#if defined(CONFIG_DRIVER_TI_CPSW) || \
+	(defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET))
 int board_eth_init(bd_t *bis)
 {
+	int rv, n = 0;
+#ifdef CONFIG_DRIVER_TI_CPSW
 	uint8_t mac_addr[6];
 	uint32_t mac_hi, mac_lo;
 
@@ -358,10 +407,10 @@ int board_eth_init(bd_t *bis)
 		if (is_valid_ether_addr(mac_addr))
 			eth_setenv_enetaddr("ethaddr", mac_addr);
 		else
-			return -1;
+			goto try_usbether;
 	}
 
-	if (board_is_bone() || board_is_bone_lt()) {
+	if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
 		writel(MII_MODE_ENABLE, &cdev->miisel);
 		cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
 				PHY_INTERFACE_MODE_MII;
@@ -371,6 +420,20 @@ int board_eth_init(bd_t *bis)
 				PHY_INTERFACE_MODE_RGMII;
 	}
 
-	return cpsw_register(&cpsw_data);
+	rv = cpsw_register(&cpsw_data);
+	if (rv < 0)
+		printf("Error %d registering CPSW switch\n", rv);
+	else
+		n += rv;
+#endif
+try_usbether:
+#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD)
+	rv = usb_eth_initialize(bis);
+	if (rv < 0)
+		printf("Error %d registering USB_ETHER\n", rv);
+	else
+		n += rv;
+#endif
+	return n;
 }
 #endif