X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Fsunxi%2FKconfig;h=f6f2a605eca32b16e12b4b110cb4e8ca80ec19f4;hb=a69fdc7787bfa2f27eed74c2ee58c28ce932d502;hp=a170c561aab10344474c4fd7921cd302b4695b25;hpb=242e3d893d1311ea38abd25613076a29961d422e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index a170c56..f6f2a60 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -1,38 +1,86 @@
 if ARCH_SUNXI
 
+# Note only one of these may be selected at a time! But hidden choices are
+# not supported by Kconfig
+config SUNXI_GEN_SUN4I
+	bool
+	---help---
+	Select this for sunxi SoCs which have resets and clocks set up
+	as the original A10 (mach-sun4i).
+
+config SUNXI_GEN_SUN6I
+	bool
+	---help---
+	Select this for sunxi SoCs which have sun6i like periphery, like
+	separate ahb reset control registers, custom pmic bus, new style
+	watchdog, etc.
+
+
 choice
 	prompt "Sunxi SoC Variant"
+	optional
 
 config MACH_SUN4I
 	bool "sun4i (Allwinner A10)"
 	select CPU_V7
+	select SUNXI_GEN_SUN4I
 	select SUPPORT_SPL
 
 config MACH_SUN5I
 	bool "sun5i (Allwinner A13)"
 	select CPU_V7
+	select SUNXI_GEN_SUN4I
 	select SUPPORT_SPL
 
 config MACH_SUN6I
 	bool "sun6i (Allwinner A31)"
 	select CPU_V7
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select SUNXI_GEN_SUN6I
 	select SUPPORT_SPL
+	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
 
 config MACH_SUN7I
 	bool "sun7i (Allwinner A20)"
 	select CPU_V7
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
+	select SUNXI_GEN_SUN4I
 	select SUPPORT_SPL
 	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
 
-config MACH_SUN8I
+config MACH_SUN8I_A23
 	bool "sun8i (Allwinner A23)"
 	select CPU_V7
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select SUNXI_GEN_SUN6I
 	select SUPPORT_SPL
+	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+
+config MACH_SUN8I_A33
+	bool "sun8i (Allwinner A33)"
+	select CPU_V7
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+
+config MACH_SUN9I
+	bool "sun9i (Allwinner A80)"
+	select CPU_V7
+	select SUNXI_GEN_SUN6I
 
 endchoice
 
+# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
+config MACH_SUN8I
+	bool
+	default y if MACH_SUN8I_A23 || MACH_SUN8I_A33
+
+
 config DRAM_CLK
 	int "sunxi dram clock speed"
 	default 312 if MACH_SUN6I || MACH_SUN8I
@@ -57,6 +105,13 @@ config DRAM_ZQ
 	---help---
 	Set the dram zq value.
 
+config DRAM_ODT_EN
+	bool "sunxi dram odt enable"
+	default n if !MACH_SUN8I_A23
+	default y if MACH_SUN8I_A23
+	---help---
+	Select this to enable dram odt (on die termination).
+
 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 config DRAM_EMR1
 	int "sunxi dram emr1 value"
@@ -65,13 +120,6 @@ config DRAM_EMR1
 	---help---
 	Set the dram controller emr1 value.
 
-config DRAM_ODT_EN
-	int "sunxi dram odt_en value"
-	default 0
-	---help---
-	Set the dram controller odt_en parameter. This can be used to
-	enable/disable the ODT feature.
-
 config DRAM_TPR3
 	hex "sunxi dram tpr3 value"
 	default 0
@@ -132,12 +180,28 @@ endchoice
 
 endif
 
+if MACH_SUN8I_A23
+config DRAM_ODT_CORRECTION
+	int "sunxi dram odt correction value"
+	default 0
+	---help---
+	Set the dram odt correction value (range -255 - 255). In allwinner
+	fex files, this option is found in bits 8-15 of the u32 odt_en variable
+	in the [dram] section. When bit 31 of the odt_en variable is set
+	then the correction is negative. Usually the value for this is 0.
+endif
+
+config SYS_CLK_FREQ
+	default 912000000 if MACH_SUN7I
+	default 1008000000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
+
 config SYS_CONFIG_NAME
 	default "sun4i" if MACH_SUN4I
 	default "sun5i" if MACH_SUN5I
 	default "sun6i" if MACH_SUN6I
 	default "sun7i" if MACH_SUN7I
 	default "sun8i" if MACH_SUN8I
+	default "sun9i" if MACH_SUN9I
 
 config SYS_BOARD
 	default "sunxi"
@@ -145,24 +209,8 @@ config SYS_BOARD
 config SYS_SOC
 	default "sunxi"
 
-config SPL_FEL
-	bool "SPL/FEL mode support"
-	depends on SPL
-	default n
-	help
-	  This enables support for Fast Early Loader (FEL) mode. This
-	  allows U-Boot to be loaded to the board over USB by the on-chip
-	  boot rom. U-Boot should be sent in two parts: SPL first, with
-	  'fel write 0x2000 u-boot-spl.bin; fel exe 0x2000' then U-Boot with
-	  'fel write 0x4a000000 u-boot.bin; fel exe 0x4a000000'. This option
-	  shrinks the amount of SRAM available to SPL, so only enable it if
-	  you need FEL. Note that enabling this option only allows FEL to be
-	  used; it is still possible to boot U-Boot from boot media. U-Boot
-	  SPL detects when it is being loaded using FEL.
-
 config UART0_PORT_F
 	bool "UART0 on MicroSD breakout board"
-	depends on SPL_FEL
 	default n
 	---help---
 	Repurpose the SD card slot for getting access to the UART0 serial
@@ -172,9 +220,6 @@ config UART0_PORT_F
 	at the same time, the system can be only booted in the FEL mode.
 	Only enable this if you really know what you are doing.
 
-config FDTFILE
-	string "Default fdtfile env setting for this board"
-
 config OLD_SUNXI_KERNEL_COMPAT
 	boolean "Enable workarounds for booting old kernels"
 	default n
@@ -182,6 +227,10 @@ config OLD_SUNXI_KERNEL_COMPAT
 	Set this to enable various workarounds for old kernels, this results in
 	sub-optimal settings for newer kernels, only enable if needed.
 
+config MMC
+	depends on !UART0_PORT_F
+	default y if ARCH_SUNXI
+
 config MMC0_CD_PIN
 	string "Card detect pin for mmc0"
 	default ""
@@ -208,6 +257,25 @@ config MMC3_CD_PIN
 	---help---
 	See MMC0_CD_PIN help text.
 
+config MMC1_PINS
+	string "Pins for mmc1"
+	default ""
+	---help---
+	Set the pins used for mmc1, when applicable. This takes a string in the
+	format understood by sunxi_name_to_gpio_bank, e.g. PH for port H.
+
+config MMC2_PINS
+	string "Pins for mmc2"
+	default ""
+	---help---
+	See MMC1_PINS help text.
+
+config MMC3_PINS
+	string "Pins for mmc3"
+	default ""
+	---help---
+	See MMC1_PINS help text.
+
 config MMC_SUNXI_SLOT_EXTRA
 	int "mmc extra slot number"
 	default -1
@@ -223,6 +291,20 @@ config USB0_VBUS_PIN
 	Set the Vbus enable pin for usb0 (otg). This takes a string in the
 	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
 
+config USB0_VBUS_DET
+	string "Vbus detect pin for usb0 (otg)"
+	default ""
+	---help---
+	Set the Vbus detect pin for usb0 (otg). This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config USB0_ID_DET
+	string "ID detect pin for usb0 (otg)"
+	default ""
+	---help---
+	Set the ID detect pin for usb0 (otg). This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
 config USB1_VBUS_PIN
 	string "Vbus enable pin for usb1 (ehci0)"
 	default "PH6" if MACH_SUN4I || MACH_SUN7I
@@ -239,6 +321,50 @@ config USB2_VBUS_PIN
 	---help---
 	See USB1_VBUS_PIN help text.
 
+config I2C0_ENABLE
+	bool "Enable I2C/TWI controller 0"
+	default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+	default n if MACH_SUN6I || MACH_SUN8I
+	---help---
+	This allows enabling I2C/TWI controller 0 by muxing its pins, enabling
+	its clock and setting up the bus. This is especially useful on devices
+	with slaves connected to the bus or with pins exposed through e.g. an
+	expansion port/header.
+
+config I2C1_ENABLE
+	bool "Enable I2C/TWI controller 1"
+	default n
+	---help---
+	See I2C0_ENABLE help text.
+
+config I2C2_ENABLE
+	bool "Enable I2C/TWI controller 2"
+	default n
+	---help---
+	See I2C0_ENABLE help text.
+
+if MACH_SUN6I || MACH_SUN7I
+config I2C3_ENABLE
+	bool "Enable I2C/TWI controller 3"
+	default n
+	---help---
+	See I2C0_ENABLE help text.
+endif
+
+if MACH_SUN7I
+config I2C4_ENABLE
+	bool "Enable I2C/TWI controller 4"
+	default n
+	---help---
+	See I2C0_ENABLE help text.
+endif
+
+config AXP_GPIO
+	boolean "Enable support for gpio-s on axp PMICs"
+	default n
+	---help---
+	Say Y here to enable support for the gpio pins of the axp PMIC ICs.
+
 config VIDEO
 	boolean "Enable graphical uboot console on HDMI, LCD or VGA"
 	default y
@@ -288,6 +414,13 @@ config VIDEO_VGA_EXTERNAL_DAC_EN
 	Set the enable pin for the external VGA DAC. This takes a string in the
 	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
 
+config VIDEO_COMPOSITE
+	boolean "Composite video output support"
+	depends on VIDEO && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
+	default n
+	---help---
+	Say Y here to add support for outputting composite video.
+
 config VIDEO_LCD_MODE
 	string "LCD panel timing details"
 	depends on VIDEO
@@ -296,6 +429,7 @@ config VIDEO_LCD_MODE
 	LCD panel timing details string, leave empty if there is no LCD panel.
 	This is in drivers/video/videomodes.c: video_get_params() format, e.g.
 	x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0
+	Also see: http://linux-sunxi.org/LCD
 
 config VIDEO_LCD_DCLK_PHASE
 	int "LCD panel display clock phase"
@@ -344,6 +478,30 @@ config VIDEO_LCD_BL_PWM_ACTIVE_LOW
 	---help---
 	Set this if the backlight pwm output is active low.
 
+config VIDEO_LCD_PANEL_I2C
+	bool "LCD panel needs to be configured via i2c"
+	depends on VIDEO
+	default n
+	---help---
+	Say y here if the LCD panel needs to be configured via i2c. This
+	will add a bitbang i2c controller using gpios to talk to the LCD.
+
+config VIDEO_LCD_PANEL_I2C_SDA
+	string "LCD panel i2c interface SDA pin"
+	depends on VIDEO_LCD_PANEL_I2C
+	default "PG12"
+	---help---
+	Set the SDA pin for the LCD i2c interface. This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
+config VIDEO_LCD_PANEL_I2C_SCL
+	string "LCD panel i2c interface SCL pin"
+	depends on VIDEO_LCD_PANEL_I2C
+	default "PG10"
+	---help---
+	Set the SCL pin for the LCD i2c interface. This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
 
 # Note only one of these may be selected at a time! But hidden choices are
 # not supported by Kconfig
@@ -373,7 +531,16 @@ config VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828
 	select VIDEO_LCD_SSD2828
 	select VIDEO_LCD_IF_PARALLEL
 	---help---
-	 7.85" 768x1024 LCD panels, such as LG LP079X01 or AUO B079XAN01.0
+	7.85" 768x1024 LCD panels, such as LG LP079X01 or AUO B079XAN01.0
+
+config VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804
+	bool "eDP 4-lane, 1.62G LCD panel via ANX9804 bridge chip"
+	select VIDEO_LCD_ANX9804
+	select VIDEO_LCD_IF_PARALLEL
+	select VIDEO_LCD_PANEL_I2C
+	---help---
+	Select this for eDP LCD panels with 4 lanes running at 1.62G,
+	connected via an ANX9804 bridge chip.
 
 config VIDEO_LCD_PANEL_HITACHI_TX18D42VM
 	bool "Hitachi tx18d42vm LCD panel"
@@ -382,24 +549,16 @@ config VIDEO_LCD_PANEL_HITACHI_TX18D42VM
 	---help---
 	7.85" 1024x768 Hitachi tx18d42vm LCD panel support
 
-endchoice
-
-
-config USB_MUSB_SUNXI
-	bool "Enable sunxi OTG / DRC USB controller in host mode"
-	default n
+config VIDEO_LCD_TL059WV5C0
+	bool "tl059wv5c0 LCD panel"
+	select VIDEO_LCD_PANEL_I2C
+	select VIDEO_LCD_IF_PARALLEL
 	---help---
-	Say y here to enable support for the sunxi OTG / DRC USB controller
-	used on almost all sunxi boards. Note currently u-boot can only have
-	one usb host controller enabled at a time, so enabling this on boards
-	which also use the ehci host controller will result in build errors.
+	6" 480x800 tl059wv5c0 panel support, as used on the Utoo P66 and
+	Aigo M60/M608/M606 tablets.
+
+endchoice
 
-config USB_KEYBOARD
-	boolean "Enable USB keyboard support"
-	default y
-	---help---
-	Say Y here to add support for using a USB keyboard (typically used
-	in combination with a graphical console).
 
 config GMAC_TX_DELAY
 	int "GMAC Transmit Clock Delay Chain"
@@ -407,4 +566,8 @@ config GMAC_TX_DELAY
 	---help---
 	Set the GMAC Transmit Clock Delay Chain value.
 
+config SPL_STACK_R_ADDR
+	default 0x4fe00000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN7I || MACH_SUN8I
+	default 0x2fe00000 if MACH_SUN9I
+
 endif