X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Fsunxi%2FKconfig;h=00011331b9810661f52562a248657ac9c1fe86b1;hb=eb77f5c9f69ef6c8cb39643b7b7107ef7bff5305;hp=fd6668fea2d040da27da3befff6c5bc84c1f4dc6;hpb=632093b566569329bc6e5b0893bdca01de905314;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index fd6668f..0001133 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -1,5 +1,32 @@
 if ARCH_SUNXI
 
+config IDENT_STRING
+	default " Allwinner Technology"
+
+config PRE_CONSOLE_BUFFER
+	default y
+
+config SPL_GPIO_SUPPORT
+	default y
+
+config SPL_LIBCOMMON_SUPPORT
+	default y
+
+config SPL_LIBDISK_SUPPORT
+	default y
+
+config SPL_LIBGENERIC_SUPPORT
+	default y
+
+config SPL_MMC_SUPPORT
+	default y
+
+config SPL_POWER_SUPPORT
+	default y
+
+config SPL_SERIAL_SUPPORT
+	default y
+
 # Note only one of these may be selected at a time! But hidden choices are
 # not supported by Kconfig
 config SUNXI_GEN_SUN4I
@@ -37,6 +64,7 @@ config MACH_SUN6I
 	select CPU_V7
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
 	select SUNXI_GEN_SUN6I
 	select SUPPORT_SPL
 	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -46,6 +74,7 @@ config MACH_SUN7I
 	select CPU_V7
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
 	select SUNXI_GEN_SUN4I
 	select SUPPORT_SPL
 	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -55,6 +84,7 @@ config MACH_SUN8I_A23
 	select CPU_V7
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
 	select SUNXI_GEN_SUN6I
 	select SUPPORT_SPL
 	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -64,6 +94,23 @@ config MACH_SUN8I_A33
 	select CPU_V7
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+
+config MACH_SUN8I_A83T
+	bool "sun8i (Allwinner A83T)"
+	select CPU_V7
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+
+config MACH_SUN8I_H3
+	bool "sun8i (Allwinner H3)"
+	select CPU_V7
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
 	select SUNXI_GEN_SUN6I
 	select SUPPORT_SPL
 	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -72,22 +119,61 @@ config MACH_SUN9I
 	bool "sun9i (Allwinner A80)"
 	select CPU_V7
 	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+
+config MACH_SUN50I
+	bool "sun50i (Allwinner A64)"
+	select ARM64
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
 
 endchoice
 
 # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
 config MACH_SUN8I
 	bool
-	default y if MACH_SUN8I_A23 || MACH_SUN8I_A33
+	default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 || MACH_SUN8I_A83T
 
+config RESERVE_ALLWINNER_BOOT0_HEADER
+	bool "reserve space for Allwinner boot0 header"
+	select ENABLE_ARM_SOC_BOOT0_HOOK
+	---help---
+	Prepend a 1536 byte (empty) header to the U-Boot image file, to be
+	filled with magic values post build. The Allwinner provided boot0
+	blob relies on this information to load and execute U-Boot.
+	Only needed on 64-bit Allwinner boards so far when using boot0.
+
+config ARM_BOOT_HOOK_RMR
+	bool
+	depends on ARM64
+	default y
+	select ENABLE_ARM_SOC_BOOT0_HOOK
+	---help---
+	Insert some ARM32 code at the very beginning of the U-Boot binary
+	which uses an RMR register write to bring the core into AArch64 mode.
+	The very first instruction acts as a switch, since it's carefully
+	chosen to be a NOP in one mode and a branch in the other, so the
+	code would only be executed if not already in AArch64.
+	This allows both the SPL and the U-Boot proper to be entered in
+	either mode and switch to AArch64 if needed.
+
+config DRAM_TYPE
+	int "sunxi dram type"
+	depends on MACH_SUN8I_A83T
+	default 3
+	---help---
+	Set the dram type, 3: DDR3, 7: LPDDR3
 
 config DRAM_CLK
 	int "sunxi dram clock speed"
+	default 792 if MACH_SUN9I
 	default 312 if MACH_SUN6I || MACH_SUN8I
 	default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+	default 672 if MACH_SUN50I
 	---help---
-	Set the dram clock speed, valid range 240 - 480, must be a multiple
-	of 24.
+	Set the dram clock speed, valid range 240 - 480 (prior to sun9i),
+	must be a multiple of 24. For the sun9i (A80), the tested values
+	(for DDR3-1600) are 312 to 792.
 
 if MACH_SUN5I || MACH_SUN7I
 config DRAM_MBUS_CLK
@@ -102,6 +188,8 @@ config DRAM_ZQ
 	int "sunxi dram zq value"
 	default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
 	default 127 if MACH_SUN7I
+	default 4145117 if MACH_SUN9I
+	default 3881915 if MACH_SUN50I
 	---help---
 	Set the dram zq value.
 
@@ -109,6 +197,7 @@ config DRAM_ODT_EN
 	bool "sunxi dram odt enable"
 	default n if !MACH_SUN8I_A23
 	default y if MACH_SUN8I_A23
+	default y if MACH_SUN50I
 	---help---
 	Select this to enable dram odt (on die termination).
 
@@ -192,8 +281,9 @@ config DRAM_ODT_CORRECTION
 endif
 
 config SYS_CLK_FREQ
+	default 816000000 if MACH_SUN50I
 	default 912000000 if MACH_SUN7I
-	default 1008000000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
+	default 1008000000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I || MACH_SUN9I
 
 config SYS_CONFIG_NAME
 	default "sun4i" if MACH_SUN4I
@@ -202,6 +292,7 @@ config SYS_CONFIG_NAME
 	default "sun7i" if MACH_SUN7I
 	default "sun8i" if MACH_SUN8I
 	default "sun9i" if MACH_SUN9I
+	default "sun50i" if MACH_SUN50I
 
 config SYS_BOARD
 	default "sunxi"
@@ -221,14 +312,19 @@ config UART0_PORT_F
 	Only enable this if you really know what you are doing.
 
 config OLD_SUNXI_KERNEL_COMPAT
-	boolean "Enable workarounds for booting old kernels"
+	bool "Enable workarounds for booting old kernels"
 	default n
 	---help---
 	Set this to enable various workarounds for old kernels, this results in
 	sub-optimal settings for newer kernels, only enable if needed.
 
+config MMC
+	depends on !UART0_PORT_F
+	default y if ARCH_SUNXI
+
 config MMC0_CD_PIN
 	string "Card detect pin for mmc0"
+	default "PF6" if MACH_SUN8I_A83T || MACH_SUN8I_H3 || MACH_SUN50I
 	default ""
 	---help---
 	Set the card detect pin for mmc0, leave empty to not use cd. This
@@ -280,6 +376,15 @@ config MMC_SUNXI_SLOT_EXTRA
 	slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
 	support for this.
 
+config INITIAL_USB_SCAN_DELAY
+	int "delay initial usb scan by x ms to allow builtin devices to init"
+	default 0
+	---help---
+	Some boards have on board usb devices which need longer than the
+	USB spec's 1 second to connect from board powerup. Set this config
+	option to a non 0 value to add an extra delay before the first usb
+	bus scan.
+
 config USB0_VBUS_PIN
 	string "Vbus enable pin for usb0 (otg)"
 	default ""
@@ -317,10 +422,17 @@ config USB2_VBUS_PIN
 	---help---
 	See USB1_VBUS_PIN help text.
 
+config USB3_VBUS_PIN
+	string "Vbus enable pin for usb3 (ehci2)"
+	default ""
+	---help---
+	See USB1_VBUS_PIN help text.
+
 config I2C0_ENABLE
 	bool "Enable I2C/TWI controller 0"
 	default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 	default n if MACH_SUN6I || MACH_SUN8I
+	select CMD_I2C
 	---help---
 	This allows enabling I2C/TWI controller 0 by muxing its pins, enabling
 	its clock and setting up the bus. This is especially useful on devices
@@ -330,12 +442,14 @@ config I2C0_ENABLE
 config I2C1_ENABLE
 	bool "Enable I2C/TWI controller 1"
 	default n
+	select CMD_I2C
 	---help---
 	See I2C0_ENABLE help text.
 
 config I2C2_ENABLE
 	bool "Enable I2C/TWI controller 2"
 	default n
+	select CMD_I2C
 	---help---
 	See I2C0_ENABLE help text.
 
@@ -343,26 +457,39 @@ if MACH_SUN6I || MACH_SUN7I
 config I2C3_ENABLE
 	bool "Enable I2C/TWI controller 3"
 	default n
+	select CMD_I2C
 	---help---
 	See I2C0_ENABLE help text.
 endif
 
+if SUNXI_GEN_SUN6I
+config R_I2C_ENABLE
+	bool "Enable the PRCM I2C/TWI controller"
+	# This is used for the pmic on H3
+	default y if SY8106A_POWER
+	select CMD_I2C
+	---help---
+	Set this to y to enable the I2C controller which is part of the PRCM.
+endif
+
 if MACH_SUN7I
 config I2C4_ENABLE
 	bool "Enable I2C/TWI controller 4"
 	default n
+	select CMD_I2C
 	---help---
 	See I2C0_ENABLE help text.
 endif
 
 config AXP_GPIO
-	boolean "Enable support for gpio-s on axp PMICs"
+	bool "Enable support for gpio-s on axp PMICs"
 	default n
 	---help---
 	Say Y here to enable support for the gpio pins of the axp PMIC ICs.
 
 config VIDEO
-	boolean "Enable graphical uboot console on HDMI, LCD or VGA"
+	bool "Enable graphical uboot console on HDMI, LCD or VGA"
+	depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I
 	default y
 	---help---
 	Say Y here to add support for using a cfb console on the HDMI, LCD
@@ -370,21 +497,21 @@ config VIDEO
 	info on how to select the video output and mode.
 
 config VIDEO_HDMI
-	boolean "HDMI output support"
+	bool "HDMI output support"
 	depends on VIDEO && !MACH_SUN8I
 	default y
 	---help---
 	Say Y here to add support for outputting video over HDMI.
 
 config VIDEO_VGA
-	boolean "VGA output support"
+	bool "VGA output support"
 	depends on VIDEO && (MACH_SUN4I || MACH_SUN7I)
 	default n
 	---help---
 	Say Y here to add support for outputting video over VGA.
 
 config VIDEO_VGA_VIA_LCD
-	boolean "VGA via LCD controller support"
+	bool "VGA via LCD controller support"
 	depends on VIDEO && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I)
 	default n
 	---help---
@@ -393,7 +520,7 @@ config VIDEO_VGA_VIA_LCD
 	Olimex A13 boards.
 
 config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
-	boolean "Force sync active high for VGA via LCD controller support"
+	bool "Force sync active high for VGA via LCD controller support"
 	depends on VIDEO_VGA_VIA_LCD
 	default n
 	---help---
@@ -411,7 +538,7 @@ config VIDEO_VGA_EXTERNAL_DAC_EN
 	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
 
 config VIDEO_COMPOSITE
-	boolean "Composite video output support"
+	bool "Composite video output support"
 	depends on VIDEO && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
 	default n
 	---help---
@@ -425,6 +552,7 @@ config VIDEO_LCD_MODE
 	LCD panel timing details string, leave empty if there is no LCD panel.
 	This is in drivers/video/videomodes.c: video_get_params() format, e.g.
 	x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0
+	Also see: http://linux-sunxi.org/LCD
 
 config VIDEO_LCD_DCLK_PHASE
 	int "LCD panel display clock phase"
@@ -477,6 +605,7 @@ config VIDEO_LCD_PANEL_I2C
 	bool "LCD panel needs to be configured via i2c"
 	depends on VIDEO
 	default n
+	select CMD_I2C
 	---help---
 	Say y here if the LCD panel needs to be configured via i2c. This
 	will add a bitbang i2c controller using gpios to talk to the LCD.
@@ -561,4 +690,8 @@ config GMAC_TX_DELAY
 	---help---
 	Set the GMAC Transmit Clock Delay Chain value.
 
+config SPL_STACK_R_ADDR
+	default 0x4fe00000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN7I || MACH_SUN8I || MACH_SUN50I
+	default 0x2fe00000 if MACH_SUN9I
+
 endif