X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Fsiemens%2Frut%2Fboard.c;h=25e2ed22a670287fcc6761eeb95a7dcca4843d77;hb=83d290c56fab2d38cd1ab4c4cc7099559c1d5046;hp=77592dbba886946ade6c977d24d3bfedd86aa9a2;hpb=f15ea6e1d67782a1626d4a4922b6c20e380085e5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index 77592db..25e2ed2 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Board functions for TI AM335X based rut board
  * (C) Copyright 2013 Siemens Schweiz AG
@@ -7,8 +8,6 @@
  * u-boot:/board/ti/am335x/board.c
  *
  * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
@@ -35,8 +34,6 @@
 #include "../common/factoryset.h"
 #include "../../../drivers/video/da8xx-fb.h"
 
-DECLARE_GLOBAL_DATA_PTR;
-
 /*
  * Read header information from EEPROM into global structure.
  */
@@ -74,7 +71,15 @@ struct cmd_control rut_ddr3_cmd_ctrl_data = {
 	.cmd2iclkout = 1,
 };
 
-	config_ddr(DDR_PLL_FREQ, RUT_IOCTRL_VAL, &rut_ddr3_data,
+const struct ctrl_ioregs ioregs = {
+	.cm0ioctl		= RUT_IOCTRL_VAL,
+	.cm1ioctl		= RUT_IOCTRL_VAL,
+	.cm2ioctl		= RUT_IOCTRL_VAL,
+	.dt0ioctl		= RUT_IOCTRL_VAL,
+	.dt1ioctl		= RUT_IOCTRL_VAL,
+};
+
+	config_ddr(DDR_PLL_FREQ, &ioregs, &rut_ddr3_data,
 		   &rut_ddr3_cmd_ctrl_data, &rut_ddr3_emif_reg_data, 0);
 }
 
@@ -135,13 +140,13 @@ static struct cpsw_slave_data cpsw_slaves[] = {
 	{
 		.slave_reg_ofs	= 0x208,
 		.sliver_reg_ofs	= 0xd80,
-		.phy_id		= 1,
+		.phy_addr	= 1,
 		.phy_if		= PHY_INTERFACE_MODE_RMII,
 	},
 	{
 		.slave_reg_ofs	= 0x308,
 		.sliver_reg_ofs	= 0xdc0,
-		.phy_id		= 0,
+		.phy_addr	= 0,
 		.phy_if		= PHY_INTERFACE_MODE_RMII,
 	},
 };
@@ -166,7 +171,7 @@ static struct cpsw_platform_data cpsw_data = {
 };
 
 #if defined(CONFIG_DRIVER_TI_CPSW) || \
-	(defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET))
+	(defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET))
 int board_eth_init(bd_t *bis)
 {
 	struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
@@ -174,7 +179,7 @@ int board_eth_init(bd_t *bis)
 	int rv;
 
 #ifndef CONFIG_SPL_BUILD
-	factoryset_setenv();
+	factoryset_env_set();
 #endif
 
 	/* Set rgmii mode and enable rmii clock to be sourced from chip */
@@ -392,7 +397,7 @@ static int conf_disp_pll(int m, int n)
 #if defined(DISPL_PLL_SPREAD_SPECTRUM)
 	writel(0x64, &cmwkup->resv6[3]); /* 0x50 */
 	writel(0x800, &cmwkup->resv6[2]); /* 0x4c */
-	writel(readl(&cmwkup->clkmoddplldisp) | (1 << 12),
+	writel(readl(&cmwkup->clkmoddplldisp) | CM_CLKMODE_DPLL_SSC_EN_MASK,
 	       &cmwkup->clkmoddplldisp); /* 0x98 */
 #endif
 	return 0;
@@ -459,4 +464,27 @@ static int board_video_init(void)
 	return 0;
 }
 #endif /* ifdef CONFIG_VIDEO */
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	int ret;
+	char tmp[2 * MAX_STRING_LENGTH + 2];
+
+	omap_nand_switch_ecc(1, 8);
+
+	if (factory_dat.asn[0] != 0)
+		sprintf(tmp, "%s_%s", factory_dat.asn,
+			factory_dat.comp_version);
+	else
+		strcpy(tmp, "QMX7.E38_4.0");
+
+	ret = env_set("boardid", tmp);
+	if (ret)
+		printf("error setting board id\n");
+
+	return 0;
+}
+#endif
+
 #include "../common/board.c"