X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Fjupiter%2Fjupiter.c;h=6e752c6554a65ec8229f571c9ebc664a992595ca;hb=6d0f6bcf337c5261c08fabe12982178c2c489d76;hp=7913c753765f609646ac5deaf6826434b9bb5488;hpb=71edc271816ec82cf0550dd6980be2da3cc2ad9e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c
index 7913c75..6e752c6 100644
--- a/board/jupiter/jupiter.c
+++ b/board/jupiter/jupiter.c
@@ -45,7 +45,7 @@
 #define SDRAM_CONFIG2	0x88b70004
 #endif
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -88,7 +88,7 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
@@ -98,7 +98,7 @@ phys_size_t initdram (int board_type)
 	ulong dramsize2 = 0;
 	uint svr, pvr;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
@@ -119,9 +119,9 @@ phys_size_t initdram (int board_type)
 
 	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
-	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
-	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
 	if (test1 > test2) {
 		sdram_start(0);
 		dramsize = test1;
@@ -147,10 +147,10 @@ phys_size_t initdram (int board_type)
 	/* find RAM size using SDRAM CS1 only */
 	if (!dramsize)
 		sdram_start(0);
-	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	if (!dramsize) {
 		sdram_start(1);
-		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+		test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
 	}
 	if (test1 > test2) {
 		sdram_start(0);
@@ -172,7 +172,7 @@ phys_size_t initdram (int board_type)
 		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 	}
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
 	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -190,7 +190,7 @@ phys_size_t initdram (int board_type)
 		dramsize2 = 0;
 	}
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
 	/*
 	 * On MPC5200B we need to set the special configuration delay in the
@@ -244,9 +244,9 @@ void flash_afterinit(ulong size)
 {
 	if (size == 0x1000000) { /* adjust mapping */
 		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
-			START_REG(CFG_BOOTCS_START | size);
+			START_REG(CONFIG_SYS_BOOTCS_START | size);
 		*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
-			STOP_REG(CFG_BOOTCS_START | size, size);
+			STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
 	}
 #if defined(CONFIG_MPC5200)
 	*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */