X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Ffreescale%2Fmx7dsabresd%2Fmx7dsabresd.c;h=fee24e2b5f571023df87b046934c494a63ab7807;hb=a187559e3d586891c917279044c5386d1b2adc6e;hp=6c863dae5a2509a0592f2ee8e68581fb5becd8c8;hpb=98e73c834467ef6f1d3e9a8102745e16b3128ac1;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c
index 6c863da..fee24e2 100644
--- a/board/freescale/mx7dsabresd/mx7dsabresd.c
+++ b/board/freescale/mx7dsabresd/mx7dsabresd.c
@@ -44,6 +44,12 @@ DECLARE_GLOBAL_DATA_PTR;
 #define LCD_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
 	PAD_CTL_DSE_3P3V_49OHM)
 
+#define QSPI_PAD_CTRL	\
+	(PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)
+
+#define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
+
+#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM)
 #ifdef CONFIG_SYS_I2C_MXC
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
 /* I2C1 for PMIC */
@@ -193,6 +199,38 @@ static void iox74lv_init(void)
 	gpio_direction_output(IOX_STCP, 1);
 };
 
+#ifdef CONFIG_NAND_MXS
+static iomux_v3_cfg_t const gpmi_pads[] = {
+	MX7D_PAD_SD3_DATA0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_DATA7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_CLK__NAND_CLE	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_CMD__NAND_ALE	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_STROBE__NAND_RE_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SD3_RESET_B__NAND_WE_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_MCLK__NAND_WP_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_TX_SYNC__NAND_DQS	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	| MUX_PAD_CTRL(NAND_PAD_READY0_CTRL),
+};
+
+static void setup_gpmi_nand(void)
+{
+	imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
+
+	/* NAND_USDHC_BUS_CLK is set in rom */
+	set_clk_nand();
+}
+#endif
+
 #ifdef CONFIG_VIDEO_MXS
 static iomux_v3_cfg_t const lcd_pads[] = {
 	MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
@@ -290,22 +328,12 @@ static struct fsl_esdhc_cfg usdhc_cfg[3] = {
 	{USDHC3_BASE_ADDR},
 };
 
-static int mmc_get_env_devno(void)
+int board_mmc_get_env_dev(int devno)
 {
-	struct bootrom_sw_info **p =
-		(struct bootrom_sw_info **)ROM_SW_INFO_ADDR;
-
-	u8 boot_type = (*p)->boot_dev_type;
-	u8 dev_no = (*p)->boot_dev_instance;
+	if (devno == 2)
+		devno--;
 
-	/* If not boot from sd/mmc, use default value */
-	if ((boot_type != BOOT_TYPE_SD) && (boot_type != BOOT_TYPE_MMC))
-		return CONFIG_SYS_MMC_ENV_DEV;
-
-	if (dev_no == 2)
-		dev_no--;
-
-	return dev_no;
+	return devno;
 }
 
 static int mmc_map_to_kernel_blk(int dev_no)
@@ -338,7 +366,7 @@ int board_mmc_init(bd_t *bis)
 	int i, ret;
 	/*
 	 * According to the board_mmc_init() the following map is done:
-	 * (U-boot device node)    (Physical Port)
+	 * (U-Boot device node)    (Physical Port)
 	 * mmc0                    USDHC1
 	 * mmc2                    USDHC3 (eMMC)
 	 */
@@ -394,7 +422,7 @@ static void mmc_late_init(void)
 {
 	char cmd[32];
 	char mmcblk[32];
-	u32 dev_no = mmc_get_env_devno();
+	u32 dev_no = mmc_get_env_dev();
 
 	if (!check_mmc_autodetect())
 		return;
@@ -455,6 +483,29 @@ int board_phy_config(struct phy_device *phydev)
 }
 #endif
 
+#ifdef CONFIG_FSL_QSPI
+static iomux_v3_cfg_t const quadspi_pads[] = {
+	MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
+	MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
+	MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
+	MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
+	MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK  | MUX_PAD_CTRL(QSPI_PAD_CTRL),
+	MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL),
+};
+
+int board_qspi_init(void)
+{
+	/* Set the iomux */
+	imx_iomux_v3_setup_multiple_pads(quadspi_pads,
+					 ARRAY_SIZE(quadspi_pads));
+
+	/* Set the clock */
+	set_clk_qspi();
+
+	return 0;
+}
+#endif
+
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
@@ -477,10 +528,18 @@ int board_init(void)
 	setup_fec();
 #endif
 
+#ifdef CONFIG_NAND_MXS
+	setup_gpmi_nand();
+#endif
+
 #ifdef CONFIG_VIDEO_MXS
 	setup_lcd();
 #endif
 
+#ifdef CONFIG_FSL_QSPI
+	board_qspi_init();
+#endif
+
 	return 0;
 }