X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Ffreescale%2Fmx53evk%2Fmx53evk.c;h=bb4621d62ece80a139b2138a991360867540a8d5;hb=6acc7c3cbc05873d62118640cf964e9c9665804c;hp=e976ae1c083d40dd132015a0587a98929dd752ac;hpb=afd855d534de22aa625cb12aa9aa45e459f7de99;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c
index e976ae1..bb4621d 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -26,8 +26,10 @@
 #include <asm/arch/mx5x_pins.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
 #include <asm/arch/iomux.h>
 #include <asm/errno.h>
+#include <asm/imx-common/boot_mode.h>
 #include <netdev.h>
 #include <i2c.h>
 #include <mmc.h>
@@ -204,8 +206,8 @@ static void setup_iomux_fec(void)
 
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
-	{MMC_SDHC1_BASE_ADDR, 1},
-	{MMC_SDHC3_BASE_ADDR, 1},
+	{MMC_SDHC1_BASE_ADDR},
+	{MMC_SDHC3_BASE_ADDR},
 };
 
 int board_mmc_getcd(struct mmc *mmc)
@@ -214,12 +216,14 @@ int board_mmc_getcd(struct mmc *mmc)
 	int ret;
 
 	mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
+	gpio_direction_input(IMX_GPIO_NR(3, 11));
 	mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
+	gpio_direction_input(IMX_GPIO_NR(3, 13));
 
 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
-		ret = !gpio_get_value(77); /* GPIO3_13 */
+		ret = !gpio_get_value(IMX_GPIO_NR(3, 13));
 	else
-		ret = !gpio_get_value(75); /* GPIO3_11 */
+		ret = !gpio_get_value(IMX_GPIO_NR(3, 11));
 
 	return ret;
 }
@@ -229,6 +233,9 @@ int board_mmc_init(bd_t *bis)
 	u32 index;
 	s32 status = 0;
 
+	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+
 	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
 		switch (index) {
 		case 0:
@@ -365,11 +372,23 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"mmc0",	MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)},
+	{"mmc1",	MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
+	{NULL,		0},
+};
+#endif
+
 int board_late_init(void)
 {
 	setup_i2c(1);
 	power_init();
 
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
 	return 0;
 }