X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Fesd%2Fash405%2Fash405.c;h=8da08facffc4ba2f54b9c7ef875b79eea32b8114;hb=297a65873d2cb2bd296253af51f59cc1391afbff;hp=8a5b03bcedb3d35a8ac79e247028a2cb2f27dea8;hpb=b706d63559aeec352bc72dd86d7d5423c15f6a60;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c
index 8a5b03b..8da08fa 100644
--- a/board/esd/ash405/ash405.c
+++ b/board/esd/ash405/ash405.c
@@ -77,34 +77,21 @@ int board_early_init_f (void)
 	/*
 	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
 
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_f (void)
-{
-	return 0;  /* dummy implementation */
-}
-
-
 int misc_init_r (void)
 {
-	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
-	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
-	volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4);
-	volatile unsigned char *duart3_mcr = (unsigned char *)((ulong)DUART3_BA + 4);
 	unsigned char *dst;
 	ulong len = sizeof(fpgadata);
 	int status;
 	int index;
 	int i;
 
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
+	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -166,18 +153,18 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_DUART_RST);
 	udelay(10); /* wait 10us */
-	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST);
+	out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_DUART_RST);
 	udelay(1000); /* wait 1ms */
 
 	/*
 	 * Enable interrupts in exar duart mcr[3]
 	 */
-	*duart0_mcr = 0x08;
-	*duart1_mcr = 0x08;
-	*duart2_mcr = 0x08;
-	*duart3_mcr = 0x08;
+	out_8((void *)(DUART0_BA + 4), 0x08);
+	out_8((void *)(DUART1_BA + 4), 0x08);
+	out_8((void *)(DUART2_BA + 4), 0x08);
+	out_8((void *)(DUART3_BA + 4), 0x08);
 
 	return (0);
 }
@@ -205,20 +192,6 @@ int checkboard (void)
 	return 0;
 }
 
-/* ------------------------------------------------------------------------- */
-
-long int initdram (int board_type)
-{
-	unsigned long val;
-
-	mtdcr(memcfga, mem_mb0cf);
-	val = mfdcr(memcfgd);
-
-	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
-}
-
-/* ------------------------------------------------------------------------- */
-
 void reset_phy(void)
 {
 #ifdef CONFIG_LXT971_NO_SLEEP