X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Fdelta%2Fdelta.c;h=878416f73dc01b50eeef9ab49b480459512ca74e;hb=6d0f6bcf337c5261c08fabe12982178c2c489d76;hp=b127ac8cab7b1e9b5569c3618cdfb6ad9362a177;hpb=ad09083c3736ea72bceee92721933513d3137b66;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/delta/delta.c b/board/delta/delta.c
index b127ac8..878416f 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -1,10 +1,6 @@
 /*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
+ * (C) Copyright 2006
+ * DENX Software Engineering
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -98,7 +94,6 @@ int board_late_init(void)
 	return 0;
 }
 
-
 /*
  * Magic Key Handling, mainly copied from board/lwmon/lwmon.c
  */
@@ -309,8 +304,8 @@ static void init_DA9030()
 	GPCR0 = (1<<17);	/* drive GPIO17 low */
 	GPSR0 = (1<<17);	/* drive GPIO17 high */
 
-#if CFG_DA9030_EXTON_DELAY
-	udelay((unsigned long) CFG_DA9030_EXTON_DELAY);	/* wait for DA9030 */
+#if CONFIG_SYS_DA9030_EXTON_DELAY
+	udelay((unsigned long) CONFIG_SYS_DA9030_EXTON_DELAY);	/* wait for DA9030 */
 #endif
 	GPCR0 = (1<<17);	/* drive GPIO17 low */
 
@@ -324,6 +319,12 @@ static void init_DA9030()
 		return;
 	}
 
+	val = 0x80;
+	if(i2c_write(addr, IRQ_MASK_B, 1, &val, 1)) {
+		printf("Error accessing DA9030 via i2c.\n");
+		return;
+	}
+
 	i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */
 	i2c_reg_write(addr, LDO2_3, 0xd1);	/* LDO2 =1,9V, LDO3=3,1V */
 	i2c_reg_write(addr, LDO4_5, 0xcc);	/* LDO2 =1,9V, LDO3=3,1V */