X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Fatmel%2Fatstk1000%2Fatstk1000.c;h=c36cb5717be4fc303b1edc3e4798f9e5f1c25cc9;hb=cb5473205206c7f14cbb1e747f28ec75b48826e2;hp=496c6a8114276338c59419d2fb86d4c613916770;hpb=c8c845cfdc6d0217135c1d5927eebd2b133a3314;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 496c6a8..c36cb57 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -24,8 +24,9 @@
 #include <asm/io.h>
 #include <asm/sdram.h>
 #include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
 #include <asm/arch/hmatrix.h>
+#include <asm/arch/portmux.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -77,14 +78,14 @@ int board_early_init_f(void)
 	/* Enable SDRAM in the EBI mux */
 	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
-	gpio_enable_ebi();
-	gpio_enable_usart1();
+	portmux_enable_ebi(sdram_config.data_bits, 23, 0, PORTMUX_DRIVE_HIGH);
+	portmux_enable_usart1(PORTMUX_DRIVE_MIN);
 #if defined(CONFIG_MACB)
-	gpio_enable_macb0();
-	gpio_enable_macb1();
+	portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
+	portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_LOW);
 #endif
 #if defined(CONFIG_MMC)
-	gpio_enable_mmci();
+	portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
 #endif
 
 	return 0;
@@ -104,20 +105,19 @@ phys_size_t initdram(int board_type)
 	unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
 
 	if (expected_size != actual_size)
-		printf("Warning: Only %u of %u MiB SDRAM is working\n",
+		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
 				actual_size >> 20, expected_size >> 20);
 
 	return actual_size;
 }
 
-void board_init_info(void)
+int board_early_init_r(void)
 {
 	gd->bd->bi_phy_id[0] = 0x10;
 	gd->bd->bi_phy_id[1] = 0x11;
+	return 0;
 }
 
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 #ifdef CONFIG_CMD_NET
 int board_eth_init(bd_t *bi)
 {