X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=board%2Famcc%2Facadia%2Facadia.c;h=0db619952eb4c3d39369d70765177a12d76b2da1;hb=297a65873d2cb2bd296253af51f59cc1391afbff;hp=8b82ea40edefdb0d74041156e1e4b81035875ded;hpb=0459e7d3a0a273064b738aa2e06fd7dcd35eec58;p=platform%2Fkernel%2Fu-boot.git

diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
index 8b82ea4..0db6199 100644
--- a/board/amcc/acadia/acadia.c
+++ b/board/amcc/acadia/acadia.c
@@ -31,24 +31,24 @@ static void acadia_gpio_init(void)
 	/*
 	 * GPIO0 setup (select GPIO or alternate function)
 	 */
-	out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
-	out32(GPIO0_OSRH, CFG_GPIO0_OSRH);	/* output select */
-	out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
-	out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H);	/* input select */
-	out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
-	out32(GPIO0_TSRH, CFG_GPIO0_TSRH);	/* three-state select */
-	out32(GPIO0_TCR, CFG_GPIO0_TCR);  /* enable output driver for outputs */
+	out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
+	out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH);	/* output select */
+	out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
+	out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H);	/* input select */
+	out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
+	out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH);	/* three-state select */
+	out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR);  /* enable output driver for outputs */
 
 	/*
 	 * Ultra (405EZ) was nice enough to add another GPIO controller
 	 */
-	out32(GPIO1_OSRH, CFG_GPIO1_OSRH);	/* output select */
-	out32(GPIO1_OSRL, CFG_GPIO1_OSRL);
-	out32(GPIO1_ISR1H, CFG_GPIO1_ISR1H);	/* input select */
-	out32(GPIO1_ISR1L, CFG_GPIO1_ISR1L);
-	out32(GPIO1_TSRH, CFG_GPIO1_TSRH);	/* three-state select */
-	out32(GPIO1_TSRL, CFG_GPIO1_TSRL);
-	out32(GPIO1_TCR, CFG_GPIO1_TCR);  /* enable output driver for outputs */
+	out32(GPIO1_OSRH, CONFIG_SYS_GPIO1_OSRH);	/* output select */
+	out32(GPIO1_OSRL, CONFIG_SYS_GPIO1_OSRL);
+	out32(GPIO1_ISR1H, CONFIG_SYS_GPIO1_ISR1H);	/* input select */
+	out32(GPIO1_ISR1L, CONFIG_SYS_GPIO1_ISR1L);
+	out32(GPIO1_TSRH, CONFIG_SYS_GPIO1_TSRH);	/* three-state select */
+	out32(GPIO1_TSRL, CONFIG_SYS_GPIO1_TSRL);
+	out32(GPIO1_TCR, CONFIG_SYS_GPIO1_TCR);  /* enable output driver for outputs */
 }
 
 int board_early_init_f(void)
@@ -57,7 +57,7 @@ int board_early_init_f(void)
 
 #if !defined(CONFIG_NAND_U_BOOT)
 	/* don't reinit PLL when booting via I2C bootstrap option */
-	mfsdr(SDR_PINSTP, reg);
+	mfsdr(SDR0_PINSTP, reg);
 	if (reg != 0xf0000000)
 		board_pll_init_f();
 #endif
@@ -65,18 +65,18 @@ int board_early_init_f(void)
 	acadia_gpio_init();
 
 	/* Configure 405EZ for NAND usage */
-	mtsdr(sdrnand0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
-	mfsdr(sdrultra0, reg);
+	mtsdr(SDR0_NAND0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
+	mfsdr(SDR0_ULTRA0, reg);
 	reg &= ~SDR_ULTRA0_CSN_MASK;
-	reg |= (SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS) |
+	reg |= (SDR_ULTRA0_CSNSEL0 >> CONFIG_SYS_NAND_CS) |
 		SDR_ULTRA0_NDGPIOBP |
 		SDR_ULTRA0_EBCRDYEN |
 		SDR_ULTRA0_NFSRSTEN;
-	mtsdr(sdrultra0, reg);
+	mtsdr(SDR0_ULTRA0, reg);
 
 	/* USB Host core needs this bit set */
-	mfsdr(sdrultra1, reg);
-	mtsdr(sdrultra1, reg | SDR_ULTRA1_LEDNENABLE);
+	mfsdr(SDR0_ULTRA1, reg);
+	mtsdr(SDR0_ULTRA1, reg | SDR_ULTRA1_LEDNENABLE);
 
 	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
 	mtdcr(uicer, 0x00000000);	/* disable all ints */
@@ -91,7 +91,7 @@ int board_early_init_f(void)
 int misc_init_f(void)
 {
 	/* Set EPLD to take PHY out of reset */
-	out8(CFG_CPLD_BASE + 0x05, 0x00);
+	out8(CONFIG_SYS_CPLD_BASE + 0x05, 0x00);
 	udelay(100000);
 
 	return 0;
@@ -105,7 +105,7 @@ int checkboard(void)
 	char *s = getenv("serial#");
 	u8 rev;
 
-	rev = in8(CFG_CPLD_BASE + 0);
+	rev = in8(CONFIG_SYS_CPLD_BASE + 0);
 	printf("Board: Acadia - AMCC PPC405EZ Evaluation Board, Rev. %X", rev);
 
 	if (s != NULL) {